AC75 AT Command Set

3.1 AT+CMER

s

Parameter Description

<mode>(num)

0(&F)

Discard "+CIEV" and "^SLCC" URCs.

1

Discard "+CIEV" and "^SLCC" URCs when TA-TE link is reserved, e.g. in

 

online data mode. Otherwise they are forwarded directly to the TE.

2

Buffer "+CIEV" and "^SLCC" URCs in the TA while TA-TE link is reserved, e.g.

 

in online data mode, and flush them to the TE afterwards. Otherwise they are

 

forwarded directly to the TE.

3

Forward "+CIEV" and "^SLCC" URCs directly to the TE. If AC75 is in online

 

data mode, URCs are signaled via sending BREAK and stored in a buffer.

 

Once it is back in command mode e.g. after +++ was entered, all URCs stored

 

in the buffer will be output.

 

 

<keyp>(num)

 

0(&F)

Keypad event reporting is not supported by AC75.

 

 

<disp>(num)

 

0(&F)

Display event reporting is not supported by AC75.

 

 

<ind>(num)

 

0(&F)

Disable indicator event reporting.

2

Enable indicator event reporting.

 

 

<bfr>(num)

 

0(&F)

TA buffer of URCs defined within this command is cleared when <mode> 1..3

 

is entered.

<indDescr>(str)

Name of indicator; for a list of all supported indicators please refer to AT+CIND and AT^SIND.

<indValue>(num)

Value of indicator; for a list of all values for the supported indicators please refer to AT+CIND and AT^SIND.

Notes

If the ME operates on different instances (MUX channels 1, 2, 3 or ASC0/ASC1) avoid different settings for routing and indicating SMS. For example, if messages shall be routed directly to one instance of the TE (set with AT+CNMI, AT^SSDA), it is not possible to activate the presentation of URCs with AT+CMER or AT+CNMI on another instance. Any attempt to activate settings that conflict with existing settings on another interface, will result in CME ERROR, or accordingly CMS ERROR.

It is recommended that priority be given to AT+CMER=<mode> 2 or 3. Otherwise, if <mode> equals 1, URCs will be discarded in case of long running AT commands or an active data connectiion.

AC75_ATC_V01.002

Page 81 of 569

10/30/06

Confidential / Released

 

 

Page 81
Image 81
Siemens AC75 manual Modenum, Keypnum, Dispnum, Indnum, Bfrnum, IndDescrstr, IndValuenum