AC75 AT Command Set
21. Java related Commands s
AC75_ATC_V01.002 Page 521 of 569 10/30/06
Confidential / Released
21. Java related Commands
This chapter describes the AT commands related to Java applications processed by the AC75.

21.1 AT^SJRA Run Java Application

The AT^SJRA write command launches the Java application.
Syntax
Parameter Description
Path of the Java application
The application name must be given as a fully qualified pathname (a:/.../...) to the jar/jad file containing the
desired application.
The local flash file system is identified by: A:. Directory separator is ''/'' (002Fh).
Example: A:/java/jam/example/helloworld/helloworld.jar
Notes
• As an alternative, the Java application can be enabled to start up automatically whenever AC75 is getting
started. Use the AT^SCFG command to make all the settings need for the Java autostart mode.
• When the Java application starts, all current calls will be terminated.
Test Command
AT^SJRA=?
Response(s)
("IMlet path")
Write Command
AT^SJRA=<appName>
Response(s)
^SJRA:
OK
If not successful:
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4Last
SIEMENS - + + + + + + - + -
<appName>(str)