AC75 AT Command Set
2.5 ATV s
AC75_ATC_V01.002 Page 38 of 569 10/30/06
Confidential / Released
2.5 ATV Set result code format mode
This command determines the contents of header and trailer transmitted with AT command result codes and
information responses. Possible responses are described in Section 2.5.1, Verbose and numeric result codes.
Syntax
Parameter Description
[0] Information response: <text><CR><LF>
Short result code format: <numeric code><CR>
1(&F) Information response: <CR><LF><text><CR><LF>
Long result code format: <CR><LF><verbose code><CR>
2.5.1 Verbose and numeric result codes
Exec Command
ATV[<value>]
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4Last
V.250 - + + + + + + - + -
<value>(num)(&W)(&V)
Verbose format Numeric format Meaning
OK 0Command executed, no errors
CONNECT 1Link established
RING 2Ring detected
NO CARRIER 3Link not established or disconnected
ERROR 4Invalid command or command line too long
NO DIALTONE 6No dial tone, dialling impossible, wrong mode
BUSY 7Remote station busy
CONNECT 2400/RLP 47 Link with 2400 bps and Radio Link Protocol
CONNECT 4800/RLP 48 Link with 4800 bps and Radio Link Protocol
CONNECT 9600/RLP 49 Link with 9600 bps and Radio Link Protocol
CONNECT 14400/RLP 50 Link with 14400 bps and Radio Link Protocol
ALERTING Alerting at called phone
DIALING Mobile phone is dialing