Siemens AC75 manual Number, ATDnmgsm

AC75 AT Command Set

7.5 ATD><n>

s

7.5	ATD><n> Mobile originated call from active memory using index
	number

Syntax

Exec Command

ATD><n>[<mgsm>];

Response(s)

ERROR

+CME ERROR: <err>

If no dialtone (parameter ATX2 or ATX4):

NO DIALTONE

If busy (parameter setting ATX3 or ATX4):

BUSY

If connection cannot be set up:

NO CARRIER

When TA returns to command mode after call release:

OK

If successfully connected:

OK

Reference(s)

V.250

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

+ + ± + + ± ± - - -

Command Description

TA attempts to set up an outgoing call to the stored number. The termination character ";" is mandatory since dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services or other functions.

Parameter Description

<n>(num)

Integer type memory location in the range of locations available in the selected memory, i.e. the index number returned by AT+CPBR.

<mgsm>(str)

String of GSM modifiers:

I Activates CLIR (disables presentation of own phone number to called party)

i Deactivates CLIR (enables presentation of own phone number to called party)

Notes

•This command may be aborted generally by receiving a character during execution. Abortion is not possible during some states of connection setup such as handshaking.

•The command is not applicable to data calls. Any attempt to dial a data call number from <n> causes the result code "NO CARRIER" to appear.

•Parameter <mgsm> only if no *# code is within the dialing string.

AC75_ATC_V01.002	Page 162 of 569	10/30/06
Confidential / Released