AC75 AT Command Set

21.3 AT^SJOTAP

s

<Appl_Dir>(str)

Directory of Java application

Directory on the ME where a new application (JAD and JAR file) is installed. When entering the application direc- tory with the AT^SJOTAP write command be sure that the path name is not terminated with a slash. For example, type "a:" or "a:/otap" rather than "a:/" or "a:/otap/".

<HTTP_User>(str) HTTP user name

<HTTP_Pwd>(str) HTTP password

<BS>(str)

Bearer Service

 

“csd“

Use Bearer service "Circuit Switched".

“gprs“

Use Bearer service "GPRS".

 

 

<Dest>(str)

 

Destination

 

Phone number if <BS>="csd" or Access point name (APN)if <BS>="gprs".

The phone number can be modified to select between ISDN or analog and to choose the bitrate. The format of the phone number and the default settings are the same as in the case of AT^SJNET (see parameter <entry point> for instructions). Please note that if no additional characters are used to modify the phone number then the default settings a = analog call and m = 9600 bps are assumed.

<Net_user>(str)

User name for accessing the network

<Net_pwd>(str)

Password for accessing the network

<DNS>(str)

Domain Name Server

<NotifyURL>(str)

URL to which result codes are posted

Notes

The authentication mode for CSD and GPRS is always PAP.

All parameters which are left out in the write command are set to "not configured", while parameters which are entered as "" will be stored as an empty string.

Parameters that have not been configured via AT command, can be configured via SMS (see [3]).

Parameters that have been configured via AT command cannot be reconfigured / overwritten via SMS.

If the execute command ends up with an error, one or more mandatory parameters have not been specified (see [3]).

AC75_ATC_V01.002

Page 526 of 569

10/30/06

Confidential / Released

 

 

Page 526
Image 526
Siemens AC75 manual ApplDirstr, HTTPUserstr Http user name HTTPPwdstr Http password, Deststr, Netuserstr, Netpwdstr, DNSstr