Siemens AC75 manual Pinstr, New pintext, Codetext

AC75 AT Command Set

5.1 AT+CPIN

s

Parameter Description

<pin>(str)

Password (string type), usually SIM PIN1.

If the requested password was a PUK, such as SIM PUK1 or PH-FSIM PUK or another password, then <pin> must be followed by <new pin>.

<new pin>(text)

If the requested code was a PUK: specify a new password or restore the former disabled password. See Section 5.1.1, What to do if PIN or password authentication fails? for more information about when you may need to enter the PUK.

<code>(text)

SIM PIN authentication
READY	PIN has already been entered. No further entry needed.
SIM PIN	ME is waiting for SIM PIN1.
SIM PUK	ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to
	enter PIN1.
SIM PIN2	ME is waiting for PIN2. This is only applicable when an attempt to access a
	PIN2 related feature was acknowledged with +CME ERROR: 17 ("SIM PIN2
	required"), for example when the client attempts to edit the FD phonebook). In
	this case the read command AT+CPIN? also prompts for SIM PIN2. Normally,
	the AT+CPIN2 command is intended for SIM PIN2.
SIM PUK2	ME is waiting for PUK2 to unblock a disabled PIN2. As above, this is only nec-
	essary when the preceding command was acknowledged with +CME ERROR:
	18 ("SIM PUK2 required") and only if the read command AT+CPIN? also
	prompts for SIM PUK2. Normally, the AT+CPIN2 command is intended for SIM
	PUK2.
Phone security locks set by client or factory
PH-SIM PIN	ME is waiting for phone-to-SIM card password if "PS" lock is active and the cli-
	ent inserts other SIM card than the one used for the lock. ("PS" lock is also
	referred to as phone or antitheft lock).
PH-SIM PUK	ME is waiting for Master Phone Code, if the above "PS" lock password was
	incorrectly entered three times.
PH-FSIM PIN	ME is waiting for phone-to-very-first-SIM card. Necessary when "PF" lock was
	set. When powered up the first time, ME locks itself to the first SIM card put into
	the card holder. As a result, operation of the mobile is restricted to this one SIM
	card (unless the PH-FSIM PUK is used as described below).
PH-FSIM PUK	ME is waiting for phone-to-very-first-SIM card unblocking password to be
	given. Necessary when "PF" lock is active and other than first SIM card is
	inserted.
PH-NET PUK	ME is waiting for network personalisation unblocking password
PH-NS PIN	ME is waiting for network subset personalisation password
PH-NS PUK	ME is waiting for network subset unblocking password
PH-SP PIN	ME is waiting for service provider personalisation password
PH-SP PUK	ME is waiting for service provider personalisation unblocking password
PH-C PIN	ME is waiting for corporate personalisation password
PH-C PUK	ME is waiting for corprorate personalisation un-blocking password

AC75_ATC_V01.002	Page 125 of 569	10/30/06
Confidential / Released