Siemens AC75 manual Socket client sends data via TCP connection with URCs, ATSISC=0

AC75 AT Command Set

10.14 Examples of how to Configure and Use Internet Service Profiles

s

AT^SISI=0	Polling for <srvState> change ("Closing" ->
	"Down").
^SISI: 0,6,0,20,20,0	The Service is in state "Down" and all data is con-
	firmed by the remote peer.
OK	Closing the Socket service.
AT^SISC=0
OK

10.14.5Socket client sends data via TCP connection with URCs

The example uses service profile 0 configured for Socket service and TCP.

AT^SISO=0	The host opens service profile 0.
OK	Socket service is ready for upload.
^SISW: 0,1
AT^SISW=0,10	The host requests to write 10 bytes.
^SISW: 0,10,10	Response that 10 bytes can be sent and are unac-
	knowledged.
0123456789
OK	The URC indicates that the Socket service is ready
^SISW: 0,1
	to transfer more data. Data of the last AT^SISW
	command are transferred to the remote host.
AT^SISW=0,10,1	The host requests to write next 10 bytes and enables
	the end-of-data flag to notify that these are the last
	10 bytes of the session.
^SISW: 0,10,20	Response that the service accepts 10 bytes and this
	data and the previously sent data are unacknowl-
	edged.
0123456789
OK	Waiting for URC.
------
^SISW: 0,2	Data transfer has been finished.
AT^SISC=0	Closing the Socket service.
OK

10.14.6Configuring and Using FTP Download (URC Mode)

First set up a connection profile as explained in Section 10.1.1 or Section 10.1.2. Enter at least all parameters which are mandatory for the connection profile.

Configure the service profile 1 for FTP:
	at^siss=1,srvType,ftp		Select service type FTP.
	OK		Select connection profile 0.
	at^siss=1,conId,0
	OK		Specify FTP address with user and password anon-
	at^siss=1,address,"ftp://
	192.168.1.2;type=d"		ymous.
	OK
Make an FTP connection:
	at^siso=1		Open the service.
	OK		Bearer is established, service is getting started.
	^SISR: 1, 1		Data is available.
	at^sisr=1,1500		Request to read 1500 bytes.
AC75_ATC_V01.002		Page 300 of 569		10/30/06
Confidential / Released