Siemens AC75 manual Fun=0, AT+CFUN=1

AC75 AT Command Set

2.9 AT+CFUN

s

•Quit: ME exits SLEEP mode.

•Temporary: ME becomes active temporarily for the duration of the event and the mode-specific follow-up time after the last character was sent or received on the serial interface.

•No effect: Event is not relevant in the selected SLEEP mode. The ME does not wake up.

Table 2.3: Wake-up events in NON-CYCLIC and CYCLIC SLEEP modes

Event	Selected mode:	Selected mode:
	<fun>=0	<fun>=7 or 9
Ignition line	No effect	No effect
/RTS0 or /RTS1 activation	Quit	Mode 7: No effect (RTS is only
		used for flow control)
		Mode 9: Temporary
Unsolicited Result Code (URC)	Quit	Temporary
Incoming voice or data call	Quit	Temporary
Any AT command (incl. outgoing	From Java: Yes	Temporary
SMS, voice or data call)	Without Java: Not possible (UART
	disabled)
Incoming SMS (AT+CNMI is set to	No effect	No effect
0,0 (this is the default setting)
Incoming SMS (AT+CNMI is set to	Quit	Temporary
1,1)
GPRS data transfer	From Java: Yes	Temporary
	Without Java: Not possible (UART
	disabled)
RTC alarm line	Quit	Temporary
AT+CFUN=1	From Java: Yes	Quit
	Without Java: Not possible (UART
	disabled)
Java terminates	Quit	Temporary

AC75_ATC_V01.002	Page 45 of 569	10/30/06
Confidential / Released