AC75 AT Command Set
13.5 AT+CMGL s
AC75_ATC_V01.002 Page 369 of 569 10/30/06
Confidential / Released
Notes
• The selected <mem1> can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
• The parameters <ra> and <tora> will only be displayed if parameter <ra> of the AT^SSCONF command is
set to 1.
• Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data
may not yet be accessible, resulting in a short delay before the requested AT command response is returned.
See Section 23.1, Restricted access to SIM data after SIM PIN authentication for further detail.
• If the ME is Java controlled, take into account that the AT Command API can handle responses up to a length
of 1024 bytes. To avoid any longer reponses it is recommended not to read the entire range of phonebook
entries at a time.