Siemens AC75 manual ATE Enable command echo, ATEvalue

AC75 AT Command Set

4.5 ATE

s

4.5ATE Enable command echo

The ATE command determines whether or not the TA echoes characters received from TE during command state.

Syntax

Exec Command

ATE[<value>]

Response(s)

OK

Reference(s)

V.250

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

- + + + + + + - + -

Parameter Description

<value>(num)(&W)(&V)

[0]	Echo mode off
1(&F)	Echo mode on

Notes

•In case of using the command without parameter, <value> is set to 0.

•When a Java application is running there is no echo available, existing settings are ignored and attempts to change the settings are disregarded.

AC75_ATC_V01.002	Page 109 of 569	10/30/06
Confidential / Released