Siemens AC75 12 AT+CMEE Mobile Equipment Error Message Format, At+Cmee=?, At+Cmee?, OK Error

AC75 AT Command Set

2.12 AT+CMEE

s

2.12AT+CMEE Mobile Equipment Error Message Format

AT+CMEE controls the format of the error result codes that indicates errors related to AC75 functionality. Format can be selected between plain "ERROR" output, error numbers or verbose "+CME ERROR: <err>" and "+CMS ERROR: <err>" messages.

Possible error result codes are listed in Table 2.4, General "CME ERROR" Codes (GSM 07.07)Table 2.5, Gen- eral "CME ERROR" Codes (SIEMENS)Table 2.6, GPRS related "CME ERROR" Codes (GSM 07.07) and Table 2.8, SMS related "CMS ERROR" Codes (GSM 07.05).

In multiplex mode (refer AT+CMUX) the setting applies only to the logical channel where selected. The setting on the other channels may differ.

Syntax

Test Command

AT+CMEE=?

Response(s)

+CMEE: (list of supported<errMode>s)

OK

Read Command

AT+CMEE?

Response(s)

+CMEE: <errMode>

OK

Write Command

AT+CMEE=<errMode>

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

GSM 07.07

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

- + + + + + + - + -

Parameter Description

<errMode>(num)(&W)(&V)

0(&F)(D)	Disable result code, i.e. only "ERROR" will be displayed.
1	Enable error result code with numeric values.
2	Enable error result code with verbose (string) values.

Example

To obtain enhanced error messages it is recommended to choose <errMode>=2.

AT+CMEE=2

OK

AC75_ATC_V01.002	Page 48 of 569	10/30/06
Confidential / Released