Siemens AC75 manual Atsics, PingInfoType =1

AC75 AT Command Set

10.11 AT^SISX

s

Parameter Description

<service>(str)

“Ping“	Service type.
<conProfileId>(num)
0...5	Internet connection profile identifier defined with parameter <conProfileId>
	of AT^SICS.

<address>(str)

Target host name or IP address for pinging (i.e. 192.168.1.3).

<request>(num)

[1]...30	Number of ping requests (ICMP Echo Requests).
<timelimit>(num)
200...[5000]...10000	Amount of time, in milliseconds, to wait for an Echo Response message related
	to a sent Echo Request message.

<pingInfoType>(num)

Marks the type and format of the information given in the command responses (see syntax of the AT^SISX write command above).

1	Ping response(s) received for the ICMP Echo Request(s). Depending on
	parameter <request> 1 - 30 rows. Address and Round Trip Time are returned
	for each request.
2	1-row packet statistic calculated from the ping response(s) received for
	<pingInfoType>=1.
3	1-row time statistics calculated from the ping response(s) received for <ping-
	InfoType>=1.

<roundTripTime>(num)

Round Trip Time in milliseconds. If the Echo Response message is not received within the time specified by <timelimit> the value -1 is returned (e.g. when the bearer shuts down during command execution).

<sent>(num)

Number of sent packets.

<received>(num)

Number of received packets.

<lost>(num)

Number of lost packets.

<lostPercent>(num)

Lost packets in percent.

<minRTT>(num)

Minimum Round Trip Time in milliseconds.

AC75_ATC_V01.002	Page 291 of 569	10/30/06
Confidential / Released