AC75 AT Command Set

10.8 AT^SISW

s

Service type

 

SMTP

SMTP service sends some "closing" commands to the SMTP server which are necessary to

 

mark the email as successfully sent on the server. The service enters "Closing" state and

 

remains in it until the final protocol exchange with the SMTP server has been completed.

 

The "OK" response following AT^SISW indicates that the SMTP service has accepted the last

 

data - IT DOES NOT indicate the successful completion of the SMTP service.

 

Successful completion will be indicated either by the appropriate URC "^SISW:x,2" or due to

 

the fact that the SMTP service state changes to "Down" state without any error.

HTTP / POP3

Parameter not applicable, i.e. value is ignored.

 

 

AC75_ATC_V01.002

Page 286 of 569

10/30/06

Confidential / Released

 

 

Page 286
Image 286
Siemens AC75 manual Smtp, Http / POP3