Siemens AC75 manual Atscport Port Configuration, Atscport=?, Scport portid, Portidnum

AC75 AT Command Set

20.4 AT^SCPORT

s

20.4AT^SCPORT Port Configuration

With AT^SCPORT a group of maximum 10 pins can be configured to act as a parallel port, which can be controlled with a single AT command. A pin can only be added once to a port, and only to a port. The first, i.e. left most parameter, corresponds to the port's LSB.

All pins of a port must be set to the same direction (input or output). See AT^SCPIN.

Syntax

Test Command

AT^SCPORT=?

Response(s)

OK

Write Command

AT^SCPORT=<pin_id>1[, <pin_id>2[, <pin_id>3[, <pin_id>4[, <pin_id>5[, <pin_id>6[, <pin_id>7[, <pin_id>8[, <pin_id>9[, <pin_id>10]]]]]]]]]

Response(s)

^SCPORT: <port_id>

OK ERROR

+CME ERROR: <err>

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

- + + + + + + - + -

Parameter Description

<port_id>(num)

Assigned port

<pin_id>(num)

Pin ID of the xth pin of this port

See AT^SCPIN for possible pin value.

AC75_ATC_V01.002	Page 513 of 569	10/30/06
Confidential / Released