AC75 AT Command Set
5.3 AT^SPIC s
AC75_ATC_V01.002 Page 130 of 569 10/30/06
Confidential / Released
5.3 AT^SPIC Display PIN counter
The AT^SPIC command can be used to find out whether the ME is waiting for a password and, if so, how many
attempts are left to enter the password.
The execute command returns the number of attempts still available for entering the currently required password,
for example the PIN, PUK, PH-SIM PUK etc.
The read command AT^SPIC? indicates which password the number of attempts stated by the execute com-
mand actually refers to. Also, the write command may be used to query the counter for a specific password: It
indicates the number of attempts still available for entering the password identified by <facility>, for example
the PIN, PIN2, PH-SIM PIN etc.
To check whether or not you need to enter a password use the read commands AT+CPIN?, AT+CPIN2? and
AT^SPIC?. If the response to AT+CPIN? is "READY" the counter of the execute command AT^SPIC relates to
PIN2. See last example. If the responses to AT+CPIN? and AT+CPIN2? both read "READY", no password is
currently required, and the referrer of the execute command AT^SPIC is explicitly undefined.
Syntax
Parameter Description
Number of attempts left to enter the currently required password. This number will be counted down after each
failure.
Test Command
AT^SPIC=?
Response(s)
OK
Read Command
AT^SPIC?
Response(s)
^SPIC: <code>
OK
Exec Command
AT^SPIC
Response(s)
^SPIC: <counter>
OK
Write Command
AT^SPIC=<facility>
Response(s)
^SPIC: <counter>
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4Last
SIEMENS - + + + + + + - + -
<counter>(num)