AC75 AT Command Set

5.4 AT+CLCK

s

5.4AT+CLCK Facility lock

AT+CLCK can be used to lock, unlock or interrogate a network or ME <facility>. The command can be aborted when network facilities are being set or interrogated.

Syntax

Test Command

AT+CLCK=?

Response(s)

+CLCK:list of supported <facility>s

OK

Write Command

AT+CLCK=<facility>, <mode>[, <password>][, <class>]

Response(s)

if <mode> is not equal 2 and command successful:

OK

if <mode>= 2 and command successful:

+CLCK: <status>[, <class>]

[+CLCK: <status>[, <class>]]

[+CLCK: ...]

OK

If error is related to ME functionality

+CME ERROR

Reference(s)

GSM 07.07, GSM 02.04, GSM 02.88, GSM 03.88, GSM 04.88

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

+

+

+

+

+

+

+

-

±

-

Parameter Description

<facility>(str)

Phone security locks set by client or factory

Primarily intended for the client to take safety precautions, "SC", "PS" and "FD" can be configured individually. "PS" may also be factory set.

Parameter <class> is not applicable to security locks. See examples below for further details.

“SC“

SIM (lock SIM cards). SIM requests password upon ME power-up and when

 

this lock command is issued.

 

<password>: SIM PIN1.

“PS“

Phone locked to SIM card. ME requests password when other than current SIM

 

card is inserted.

 

"PS" lock is frequently referred to as "phone lock", or "device lock". Accord-

 

ingly, the password may be called "phone code" or "device code". The "PS"

 

password is not associated with the PUK of the SIM card. If incorrectly entered

 

three times, the Master Phone Code is required to lift the lock. This is an 8-digit

 

device code associated to the IMEI number of the mobile which can only by

 

obtained from the manufacturer of the module. Once the Master Phone Code

 

has been acctepted, the mobile is operational, and the "PS" lock is no longer

 

active. If needed it must be set once again.

AC75_ATC_V01.002

Page 134 of 569

10/30/06

Confidential / Released

 

 

Page 134
Image 134
Siemens AC75 manual AT+CLCK Facility lock, At+Clck=?, AT+CLCK=facility, mode, password, class, +CLCK status, class