AC75 AT Command Set

8.4 AT+CREG

s

<stat>(num)(&V)

0

Not registered, ME is currently not searching for new operator

 

Normally, status 0 occurs temporarily between two network search phases

 

(status 2). However, if it persists, one the following reasons may apply:

 

• Automatic network selection is active, but probably there is

 

- no SIM card available

 

-

no PIN entered

 

- no valid Home PLMN entry found on the SIM

 

• Manual network selection is active and the selected network is available,

 

but login fails due to one of the following reasons:

 

- #11 ... PLMN not allowed

 

- #12 ... Location area not allowed

 

- #13 ... Roaming not allowed in this location area

 

In either case, user intervention is required. Yet, emergency calls can be made

 

if any network is available.

1

Registered to home network

2

Not registered, but ME is currently searching for a new operator

 

The ME searches for an available network. Failure to log in until after more than

 

a minute may be due to one of the following reasons:

 

• No network available or insufficient Rx level.

 

• The ME has no access rights to the networks available.

 

• Networks from the SIM list of allowed networks are around, but login fails

 

due to one of the following reasons:

 

- #11 ... PLMN not allowed

 

- #12 ... Location area not allowed

 

- #13 ... Roaming not allowed in this location area

 

After this, the search will be resumed (if automatic network search is

 

enabled).

 

• The Home PLMN or an allowed PLMN is available, but login is rejected by

 

the cell (reasons: Access Class or LAC).

 

If at least one network is available, emergency calls can be made.

3

Registration denied

 

• Authentication or registration fails after Location Update Reject due to one

 

of the following reasons:

 

- #2 ... IMSI unknown at HLR

 

-

#3 ... Illegal MS

 

-

#6 ... Illegal ME

 

Either the SIM or the MS or the ME are unable to log into any network. No

 

further attempt is made to search or log into a network. User intervention is

 

required. Emergency calls can be made, if any network is available.

4

Unknown (not used)

5

Registered, roaming

 

The ME is registered at a foreign network (national or international network)

<lac>(str)

Two byte location area code in hexadecimal format (e.g. "00C3" equals 193 in decimal).

AC75_ATC_V01.002

Page 201 of 569

10/30/06

Confidential / Released

 

 

Page 201
Image 201
Siemens AC75 manual Lacstr