AC75 AT Command Set
20.6 AT^SGIO s
AC75_ATC_V01.002 Page 515 of 569 10/30/06
Confidential / Released
20.6 AT^SGIO Get IO state of a specified pin or port
Syntax
Parameter Description
This can be either an already configured <pin_id> or an already opened <port_id>.
State read on this <io_id>.
0Low for <pin_id>
1 High for <pin_id>
0...1023 For <port_id>
Note
• If one gets the state of a port whose width is less than 10 bits, the bits of <value> that are more significant
than the MSB of the port are set to zero.
Test Command
AT^SGIO=?
Response(s)
^SGIO:(list of supported <io_id>s)
OK
Write Command
AT^SGIO=<io_id>
Response(s)
^SGIO: <value>
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4Last
SIEMENS - + + + + + + - + -
<io_id>(num)
<value>(num)