Siemens AC75 manual At+Cops?, +COPSmode, format, oper, AT+COPS=mode, format, oper, OpStatusnum

AC75 AT Command Set

8.2 AT+COPS

s

Read Command

AT+COPS?

Response(s)

+COPS:<mode>[, <format>[, <oper>]]

OK ERROR

+CME ERROR: <err>

Write Command

AT+COPS=<mode>[, <format>[, <oper>]]

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

GSM 07.07

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

± + + + + + + - - -

Parameter Description

<opStatus>(num)

Status
0	Unknown
1	Operator available
2	Current operator
3	Operator forbidden

<oper>(str) Operator

If test command: Operator name in long alphanumeric format and numeric format.

If read command: Operator name as per <format>.

If write command: Operator name in numeric format.

<mode>(num)(&V)

Parameter values 0 and 1 are stored non-volatile in the AC75.

0(D)	Automatic mode; <oper> field is ignored.
1	Manual operator selection
	Write command requires <oper> in numeric format, i.e. <format> shall be 2.
	Read command returns the current <mode> and the currently selected
	<oper>. If no operator is selected, <format> and <oper> are omitted.
2	Manually deregister from network and remain unregistered until <mode>=0 or
	1 or 4 is selected.
3	Set only <format> (for AT+COPS read command).
4	Automatic / manual selection; if manual selection fails, automatic mode
	(<mode>=0) is entered (<oper> field will be present).

AC75_ATC_V01.002	Page 196 of 569	10/30/06
Confidential / Released