AC75 AT Command Set

1.5 Supported character sets

s

1.5.1GSM alphabet tables and UCS2 character values

This section provides tables for the GSM 03.38 alphabet supported by the ME. Below any GSM character find the corresponding two byte character value of the UCS2 alphabet.

(For related mapping definition see: http://www.unicode.org/Public/MAPPINGS/ETSI/GSM0338.TXT)

Figure 1.1: Main character table of GSM 03.38 alphabet

1)This code is an escape to the following extension of the 7 bit default alphabet table.

2)This code is not a printable character and therefore not defined for the UCS2 alphabet. It shall be treated as the accom- panying control character.

3)As the standard GSM alphabet does not provide a backspace functionality the AC75 is designed to use the GSM charac- ter 08 (hex 0x08) as backspace. This allows the user to easily erase the last character when using an ASCII terminal. On the other hand, this solution requires entering the escape sequence \08 for writing the "ò" character in GSM alphabet.

AC75_ATC_V01.002

Page 22 of 569

10/30/06

Confidential / Released

 

 

Page 22
Image 22
Siemens AC75 manual GSM alphabet tables and UCS2 character values