Siemens AC75 manual RealLocReqnum, Numberstr

AC75 AT Command Set

17.10 AT^SPBG

s

output but terminated with a "+CME ERROR: "invalid index".

Note: The maximum value of <index2> is 255, regardless of the phonebook type and its range indicated by the parameter <used>. If a value greater than 255 is used the query returns no phonebook records, and only "+CME ERROR: invalid index" is shown.

<RealLocReq>(num)

Is a display of the "real" <location> of the entry required?

[0]	Do not show an entry's "real" location number. Parameter <location> will not
	be displayed.
1	Show the "real" location number as parameter <location> at the end of each
	entry.

<number>(str)

String type phone number in format specified by <type>.

The number parameter may be an empty string.

<type>(num)

Type of address octet, which defines the used type of number (ton) and the numbering plan identification (npi). Please consider that for types other than 129 or 145 dialing from phonebook with ATD><mem><n> is, depending on the network, not always possible (refer to GSM 04.08 subclause 10.5.4.7 for details). See also <type> of

AT+CPBW.

Possible values are:

145	Dialing string <number> includes international access code character '+'
161	National number. Network support of this type is optional.
209	Dialing string <number> has been saved as ASCII string and includes non-
	digit characters other than "*", "#" or "+". Note that phonebook entries saved
	with this type cannot be dialed.
255	Dialing string <number> is a command to control a Supplementary Service,
	i.e. "*", "#" codes are contained. Network support of this type is optional.
129	Otherwise

<text>(str)(+CSCS)

Text assigned to the phone number. The maximum length for this parameter is given in test command response <tlength>.

<used>(num)

Value indicating the number of used locations in selected memory storage.

<location>(num)

The location within phonebook memory at which the corresponding entry is located. This location may be used for other commands (e.g. AT+CPBR or ATD><mem><n>)

<nlength>(num)

Maximum length of phone number for "normal" locations. Depending on the storage, a limited number of loca- tions with extended memory is available per phonebook. Please refer to AT command AT+CPBW for detail.

AC75_ATC_V01.002	Page 450 of 569	10/30/06
Confidential / Released