Siemens manual AC75 AT Command Set

AC75 AT Command Set

13.6 AT+CMGR

s

Notes

•Response if AT+CMGR is used to read an empty record index: +CMGR: 0,,0

•Response if AT+CMGR is used to read a non-existent record index: +CMS ERROR: invalid memory index

•The parameters <ra> and <tora> will only be displayed if parameter <ra> of the AT^SSCONF command is set to 1.

•Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data may not yet be accessible, resulting in a short delay before the requested AT command response is returned. See Section 23.1, Restricted access to SIM data after SIM PIN authentication for further detail.

AC75_ATC_V01.002	Page 371 of 569	10/30/06
Confidential / Released