AC75 AT Command Set
8.7 AT^SMOND s
AC75_ATC_V01.002 Page 206 of 569 10/30/06
Confidential / Released
8.7 AT^SMOND Cell Monitoring
The AT^SMOND execute command can be used to obtain status information of the service cell and up to six neigh-
bour cells. The advantage over other cell monitoring commands is that AT^SMOND delivers more detailed infor-
mation about the received signal strength.
Syntax
Parameter Description
Serving cell information (comma-separated, no cr/lf included)
<MCC>,<MNC>,<LAC>,<cell>,<BSIC>,<chann>,<RxLev>,<RxLev>Full,<RxLev>Sub,<RxQual>,<RxQual
>Full,<RxQual>Sub,<Timeslot>
If no serving cell is found, unavailable values are omitted:" ,,,,,,<RxLev>,,,0,,,0"
Neighbour cell information for neighbour cell 1 through 6 (comma-separated, no cr/lf included)
<MCC>1,<MNC>1,<LAC>1,<cell>1,<BSIC>1,<chann>1,<RxLev>1, (these parameters repeated for neighbour
cells 2 through 6 with no CR/LF): ... <MCC>6,<MNC>6,<LAC>6,<cell>6,<BSIC>6,<chann>6,<RxLev>6
An unavailable cell appears as follows: " ,,,,,,0"
Values for RSSI and BER (comma-separated, no cr/lf included)
<RSSI>,<BER>
Mobile country code
3 digits, e.g. 232
000 Not decoded
Test Command
AT^SMOND=?
Response(s)
OK
ERROR
+CME ERROR
Exec Command
AT^SMOND
Response(s)
^SMOND: [<sci>][, <nci>][, <TA>][, <rssiber>]
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4Last
SIEMENS, 3GPP TS 05.08 + + + + + + + - - -
<sci>(str)
<nci>(str)
<rssiber>(str)
<MCC>(num)