Siemens AC75 manual Atsstgi SAT Get Information, Atsstgi=?, Atsstgi?, Sstgi state, cmdType

AC75 AT Command Set

16.3 AT^SSTGI

s

16.3AT^SSTGI SAT Get Information

Regularly this command is used upon receipt of an URC "^SSTN" to request the parameters of the Proactive Command.

Then the TA is expected to acknowledge the AT^SSTGI response with AT^SSTR to confirm that the Proactive Command has been executed. AT^SSTR will also provide any user information, e.g. a selected menu item. The Proactive Command type value specifies to which "^SSTN" the command is related.

Syntax

Test Command

AT^SSTGI=?

Response(s)

^SSTGI:(list of supported <state>s), (list of supported <cmdType>s)

OK

Read Command

AT^SSTGI?

Response(s)

^SSTGI: <state>, <cmdType>

OK

Write Command

AT^SSTGI=<cmdType>

Response(s)

OK ERROR +CME ERROR

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

- + + + + + + - + -

Parameter Description

<state>(num)

AC75 Remote-SAT interface states

0	RESET
1	OFF
2	IDLE
3	PAC
4	WAIT

<cmdType>(num)

Related Proactive Command

AC75_ATC_V01.002	Page 431 of 569	10/30/06
Confidential / Released