Siemens AC75 manual Usednum, Totalnum

AC75 AT Command Set

17.4 AT+CPBS

s

“MC“	Missed (unanswered received) calls list
	Capacity: max. 10 entries
	Location: ME
	AT+CPBW command is not applicable to this storage. The MC list can be
	deleted with AT^SPBD.
“RC“	Received calls list
	Capacity: max. 10 entries
	Location: ME
	AT+CPBW command is not applicable to this storage. The RC list can be
	deleted with AT^SPBD.

<used>(num)

Value indicating the number of used locations in selected memory storage.

<total>(num)

Value indicating the maximum number of locations allowed in the selected memory storage.

Notes

•Users should be aware that when using this AT command quickly after SIM PIN authentication the SIM data may not yet be accessible, resulting in a short delay before the requested AT command response is returned. See Section 23.1, Restricted access to SIM data after SIM PIN authentication for further detail.

•If the SIM card is changed, all records of the "MC", "RC" and "LD" phonebooks stored on the ME will be deleted automatically. If the same SIM is removed and reinserted, no automatic deletion is performed. Calls made after last switch-on will be lost from "MC", "RC" and "LD" phonebook, if the SIM is removed and rein- serted during normal operation.

•The following call history rule applies to the phonebook types "LD", "MC" and "RC":

When the same number is dialed several times in direct succession the "LD" phonebook will store one single entry. When dialed several times, but in a row with different numbers, the same number will be logged each time after dialing, resulting in double or multiple "LD" phonebook entries related to this number.

Likewise, the "MC" or "RC" phonebook will store only a single entry when calls from the same number are received in direct succession, and double or multiple entries when calls from the same number are received several times, but amongst other incoming calls from different numbers.

AC75_ATC_V01.002	Page 439 of 569	10/30/06
Confidential / Released