Siemens AC75 manual ATQ Set result code presentation mode, ATQn

AC75 AT Command Set

2.4 ATQ

s

2.4ATQ Set result code presentation mode

This parameter setting determines whether or not the TA transmits any result code to the TE. Information text transmitted in response is not affected by this setting.

Syntax

Exec Command

ATQ[<n>]

Response(s)

If <n>=0:

OK

If <n>=1: (none)

Reference(s)

V.250

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

- + + + + + + - + -

Parameter Description

<n>(num)(&W)(&V)

[0](&F)	DCE transmits result code
1	Result codes are suppressed and not transmitted

Note

•If Java is running, the firmware will ignore the command. Responses will be invalid or result in "ERROR". See also "AC75 Java User's Guide" [3], Section "Configuring serial interface".

AC75_ATC_V01.002	Page 37 of 569	10/30/06
Confidential / Released