Siemens AC75 manual Configuration Commands, AT&Fvalue, Valuenum

AC75 AT Command Set

2. Configuration Commands

s

2.Configuration Commands

The AT Commands described in this chapter allow the external application to determine the AC75's behaviour under various conditions.

2.1 AT&F Set all current parameters to manufacturer defaults

AT&F sets all current parameters to the manufacturer defined profile. All defined GPRS contexts which are not activated or not online will be undefined if the non volatile storage of CGDCONT settings is not activated by the AT^SCFG parameter "GPRS/PersistentContexts" (see AT+CGDCONT).

Syntax

Exec Command

AT&F[<value>]

Response(s)

OK

Reference(s)

V.250

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

- + + + + + + - + -

Parameter Description

<value>(num)

[0] Set all TA parameters to manufacturer defaults

Notes

•List of parameters reset to manufacturer default can be found in Section 23.6, Factory Default Set- tings Restorable with AT&F.

•In addition to the default profile, you can store an individual one with AT&W. To alternate between the two pro- files enter either ATZ (loads user profile) or AT&F (restores factory profile).

•Every ongoing or incoming call will be terminated.

AC75_ATC_V01.002	Page 32 of 569	10/30/06
Confidential / Released