Siemens AC75 manual 12.7 AT+FTM Transmit Data, At+Ftm=?, AT+FTM=mod

AC75 AT Command Set

12.7 AT+FTM

s

12.7AT+FTM Transmit Data

The AT+FTM command causes the TA to transmit data, using one of the modulation schemes defined in Section 12.1, FAX parameters.

An ERROR response code results if the write command is issued while the modem is on-hook. The test com- mand can be used in on-hook or off-hook mode to check the modulation schemes supported by AC75.

Syntax

Test Command

AT+FTM=?

Response(s)

(list of <mod>s)

OK

Write Command

AT+FTM=<mod>

Response(s)

CONNECT

If error is related to ME functionality:

ERROR

Reference(s)

TIA/EIA-578

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

- + - + + - - - - -

Note

•<mod>= 3 is not possible

AC75_ATC_V01.002	Page 358 of 569	10/30/06
Confidential / Released