SAP server | Siemens AC75 instruction

AC75 AT Command Set	s

The AC75 can operate either as SAP server or as SAP client. A brief description of the configuration is given below.

SAP server

The SAP server has direct (galvanic) access to a SIM. It acts as a SIM card reader which assists the SAP client in accessing and controlling this SIM via the serial link.

After RSA activation, the SAP server waits for SAP CONNECTION_REQ messages from the SAP client (see Figure 15.3, SIM usage states of SAP server). The SAP server still uses its local SIM card until the parameter negotiation with an SAP client has been accomplished successfully.

Figure 15.3: SIM usage states of SAP server

AC75_ATC_V01.002	Page 416 of 569	10/30/06
Confidential / Released

Image 416

Siemens AC75 manual SAP server

Contents

AT Command Set AC75 AT Command Set Contents Atsind AT+CEERATS18 AT+CPAS AT+CGMM AT+GMMAT+CGMR AT+GMR Atmonp AtsalsAtshom Atsplm AT+CGACT AT+CGANSAT+CGAUTO AT+CGDATA AT+FRH AT+FRMAT+FRS AT+FTH Atsrsa AtsrsmAtssta Sstn AT+CCLK AT+CALAAtsad Atsbc 23.3 List of Tables List of Figures SIM usage states of SAP server Introduction Scope of the document Related documents PIN Document conventionsQuick reference table Superscript notation for parameters and values AT Command Syntax Using Parameters Combining AT commands on the same command line Supported character sets Ascii Null GSM alphabet tables and UCS2 character values AC75 AT Command Set UCS2 2 UCS2 and GSM data coding and conversion for SMS text modeGSM Case GSM IRA to 8 bit IRA to 16 bit Hardware Flow Control RTS/CTS Handshake Serial Interface Flow ControlSoftware Flow Control XON/OFF Handshake AC75 AT Command Set Communication between Customer Application and AC75 Unsolicited Result Code Presentation Common PCN Handset Specification Cphs CSP Errors and Messages Valuenum Configuration CommandsAT&Fvalue Activeprofile AT&V Display current configurationAT&Vvalue 1 AT&V responses Active Profile+FCLASS +CGSMS AC75 AT Command Set ERROR/+CME Error err AT&Wvalue ATQ Set result code presentation mode ATQn ATV Set result code format mode ErrorVerbose and numeric result codes ATVvalue ATX Set Connect result code format and call monitoring ATXvalue AT\V Set Connect result code format AT\Vvalue ATZ Set all current parameters to user defined profile ATZvalue OK Error +CME Error AT+CFUN Set phone functionalityAT+CFUN=? +CFUN fun Funnum Sysstart Charge only ModeSysstart Wake up the ME from Sleep mode Rstnum Fun=0 AT+CFUN=1 Atsmso Switch off mobile station Smso MS OFF OK ErrorATSMSO=? Atsmso 11 AT+GCAP Request complete TA capabilities list AT+GCAP=?AT+GCAP +GCAP name 12 AT+CMEE Mobile Equipment Error Message Format OK ErrorAT+CMEE=? AT+CMEE? 12.1 CME/CMS Error Code Overview General CME Error Codes Siemens SMS related CMS Error Codes GSM No +CNMA ACK Expected AC75 AT Command Set AT+CSCS? 13 AT+CSCS Select TE character setAT+CSCS=? AutoExecATC, time range of AutoExecPeriod Atscfg Extended Configuration SettingsATSCFG=? ATSCFG? Scfg Userware/Stdout, if, intvalue, filename, logmode Automatic AT command execution Error +CME Error Scfg Tcp/BufSize, tcpBufSize Syslog Enabled Error +CME Error Error +CME Error Sysstart Airplane Mode Scfg Stdout , if, intvalue, filename, logmode EcATC at a given AutoExecIndex AutoExecATCRiod AutoExecType value AutoExecType event RFU AutoExecATCstr+CSCSAutoExecPeriodstr+CSCS AutoExecPeriodTimeLeftstr+CSCS Form a Gprs attach Sysstart Airplane Mode appears Psm9tostr+CSCS Rbpstr+CSCS TcpBufSizestr+CSCS TcpWithUrcstr+CSCS DescrIndexstr+CSCS OtapTracerstr+CSCSDeviceDescrstr+CSCS Manufacturerstr+CSCS Succstr+CSCS Groid USB Filename and logmode UDPFile AT+CMGD=1 AT+CMGF=1AT+CNMI=1,1 AT+CSCS=GSM ScfgSmso MS OFF ATSM20=CallMode, CmgwMode ATSM20 Set M20 compatibility modeSM20CallMode, CmgwMode Status Control Commands AT+CMER Mobile Equipment Event ReportingAT+CMER=? AT+CMER? Modenum KeypnumDispnum Indnum AT+CIND? AT+CIND Indicator controlAT+CIND=? Also refer to .1, Call Status Information No Carrier Atsind Extended Indicator Control ATSIND=indDescr, modeATSIND=? ATSIND? +CIEV indDescr, indValue +CIEV indDescr, adnEntry, adnNumber, adnType, adnText+CIEV indDescr, indValue, vmCounter +CIEV indDescr, indValue, eonsOperator, servProvider AC75 AT Command Set AC75 AT Command Set IndValuenum Atsind only AT+CIND ATH AT+CEER Extended Error Report AT+CEER=?AT+CEER +CEER locationID, reason, ssRelease Cause Location ID for the extended error report AT+clck=oi,1,0000,3 +CME Error incorrect passwordATD01751223344 +CEER 8,21,0 Siemens release cause for L3 Radio Resource RR Siemens L2 causeGSM release cause for L3 Radio Resource RR AC75 AT Command Set Siemens release cause for L3 Mobility Management MM GSM release cause for L3 Call Control CC AC75 AT Command Set GSM Release cause for Supplementary Service Call Siemens release cause for L3 Call Control CC GSM release cause for Session Management SM Siemens release cause for PPP/IP-Stack GSM cause for L3 Protocol module or other local causeSiemens release cause for Gprs API ATS18 Extended call release report +CAUSE locationIDreasonATS18? ATS18=n Busy Connect 9600/RLP AT+CPAS Mobile equipment activity status AT+CPAS=?AT+CPAS +CPAS pas AT+WS46 Select wireless network AT+WS46=?AT+WS46? AT+WS46=n AT\Qn Serial Interface Control CommandsAT\Q Flow control 250 , Siemens AT&C Set Data Carrier Detect DCD Line modeAT&Cvalue AT&D Set circuit Data Terminal Ready DTR function mode AT&Dvalue AT&S Set circuit Data Set Ready DSR function mode AT&Svalue ATE Enable command echo ATEvalue AT+ICF Serial Interface Character Framing AT+ICF=?AT+ICF? +ICF format, parity AC75 AT Command Set AT+IFC=? AT+IFC?+IFC TEflowcontrol, TAflowcontrol AT+IFC=TEflowcontrol, TAflowcontrol AC75 AT Command Set AT+ILRR? AT+ILRR Set TE-TA local rate reportingAT+ILRR=? AC75 AT Command Set AT+IPR Set fixed local rate AT+IPR=?AT+IPR? +IPR rate Autobauding AT&W AT+CMUX? 10 AT+CMUX Enter multiplex modeAT+CMUX=? Restrictions on Multiplex mode AT&V Second serial interface ASC1 +CME Error unknown ATSTPB=?ATSTPB? Stpb n Security Commands AT+CPIN PIN AuthenticationAT+CPIN=? AT+CPIN? Codetext PinstrNew pintext What to do if PIN or password authentication fails? AC75 AT Command Set AT+CPIN2 PIN2 Authentication AT+CPIN2=?AT+CPIN2? AT+CPIN2=pin, new pin AT+CPIN2? +CPIN2 SIM PUK2 AT+CPBS=FD Atspic Display PIN counter ATSPIC=?ATSPIC? Atspic At+cpin=9999 +CME Error incorrect password FacilitystrAt+cpin? +CPIN SIM PIN +CPIN SIM PUK +CPIN PH-SIM PINSpic PH-SIM PIN Spic PH-SIM PUK Spic SIM PIN2 OK +CREG+CPIN Ready AT+CLCK=facility, mode, password, class AT+CLCK Facility lockAT+CLCK=? +CLCK status, class Factory defined SIM locks Passwordstr StatusnumClassnum SMS Mode=2 AT+CLCK=SC,1,9999AT+CLCK=SC,0,9999 SIM PIN1 AT+CPIN? +CPIN SIM PIN AT+CPIN=1111AT+CPIN? +CPIN PH-SIM PIN AT+CPIN=3333 ATSLCK=facility, mode, password, class Atslck Facility lockATSLCK=? Slck status, class AT+CPWD Change Password +CPWDlist of supported facility, password lengthAT+CPWD=facility, old password, new password Password length 4 to 8 digits Password length 4 digits Word authentication fails? AT+CPIN2 command AT+CPWD=PS,12345678,1111 AT+CPWD=PS,12345678 Atspwd Change Password SPWDlist of supported facility, password lengthATSPWD=facility, old password, new password +CME Error Operation not supported Pass Password length of CM 8 digitsATSPWD=CM Error CME Error Atscsl Customer SIM LockATSCSL=? Scsl PUKstr Datastr AT+CPBS? +CPIN PH-NET PUK AT+CPIN=11223344 Identification Commands ATI Display product identification informationATI ATIvalue AT+CGMI Request manufacturer identification AT+GMI Request manufacturer identification AT+CGMM Request model identification AT+GMM Request model identification AT+CGMR Request revision identification of software status AT+GMR Request revision identification of software status AT+GSN Request International Mobile Equipment Identity Imei AT+CGSN=?AT+CGSN AT+GSN=? AT+CIMI=? AT+CIMIImsi Imsistr AT+CIND and AT+CMER Call related CommandsCall Status Information ATA Answer a call ATAConnect text Textstr No Dialtone ATD Mobile originated call to specified numberATDnmgsm Mgsmstr ATD03022222222 ATDmemnmgsm Memstr ATDLD9 AT+CPBR=1,xxATDSM15 Number Responding field ATDstrmgsm Atdi Mobile originated call to Isdn number ATDIn Atdl Redial last number used Atdl ATH Disconnect existing connection ATHn AT+CHUP 10 AT+CHUP Hang up callAT+CHUP=? Causenum ATSHUP=?ATSHUP=cause, cn AC75 AT Command Set ATS0? ATS0=n ATS6=n 13 ATS6 Set pause before blind dialingATS6? ATS7? ATS7=n ATS8? ATS8=n ATS10=n CarrierATS10? ATO Switch from command mode to data mode / PPP online mode ATOn 18 +++ Switch from data mode to command mode 19 AT+CBST Select bearer service type AT+CBST=?AT+CBST? +CBST speed, name, ce Cenum&W Non-transparent data calls AT+CRLP=?AT+CRLP? +CRLP iws, mws, T1, N2 21 AT+CLCC List current calls of ME AT+CLCC=?AT+CLCC +CLCC idx, dir, stat, mode, mpty, number, type, alpha Typenum MptynumNumberstr Atslcc Siemens defined command to list current calls of ME ATSLCC=?ATSLCC? Atslcc Presentation of URC Slcc disabled Statnum Traffic channel assignednum Slcc Ring 23 AT+CR Service reporting control +CR modeAT+CR=? AT+CR? AT+CRC=? AT+CRC? +CSNS mode 25 AT+CSNS Single Numbering SchemeAT+CSNS=? AT+CSNS? Atscni List Call Number Information ATSCNI=?Atscni Scni id1,cs,number,type Scni id2,cs,number,type Atslcd Display Last Call Duration ATSLCD=?Atslcd Timestr Atstcd Atstcd Display Total Call DurationATSTCD=? ATP Select pulse dialing ATT Select tone dialingATP ATT Network Service Commands AT+COPN Read operator namesAT+COPN=? AT+COPN AT+COPS Operator Selection AT+COPS=? AT+COPS? +COPSmode, format, operAT+COPS=mode, format, oper OpStatusnum Or 3-digit Mobile Network Code MNC EonsTypenum Atsops Extended Operator SelectionATSOPS=? OpName Formatnum AT+CREG Network registration AT+CREG=?AT+CREG? +CREG n, stat, lac, ci Lacstr +CREG 1,0145,291A AT+CREG=2AT+COPS=0 AT+CSQ Signal quality AT+CSQ=?AT+CSQ +CSQ rssi,ber Atsmonc Atsmonc Cell MonitoringATSMONC=? BSICnum Channnum Atsmond Cell Monitoring ATSMOND=?Atsmond Smond sci, nci, TA, rssiber Timeslotnum RxLevnumRxQualnum Atsmond SMOND262,01,3008,6060,32,100,66,,,0,,,0 Atsfnur Select the fixed network user rate ATSFNUR=?ATSFNUR? Sfnur value Atmoni Monitor idle mode and dedicated mode ATMONI=?Atmoni ATMONI=period Atmoni responses NCC BCC PWR Service statesMNC LAC Atmonp Monitor neighbour cells ATMONP=?Atmonp ATMONP=period Atmonp responses Chann DBmMCC MNC BCC 100 Atsmong Gprs Monitor ATSMONG=?Atsmong ATSMONG=table, period Atsmong Cell Info Table Gprs MonitorBcch Pbcch PAT MCC MNC NOM RAC # Cell # Atsals Alternate Line Service ATSALS=?ATSALS? Sals view, line ATSALS=1,1 Sals Atshom Display Homezone ATSHOM=?Atshom Shom homezonestate Atsplm Read the Plmn list ATSPLM=?ATSPLM? Atsplm Indexnum NumericstrRangenum 15 AT+CPOL Preferred Operator List AT+CPOL=?AT+CPOL? +CPOL index, format, operator Atsplr Read entry from the preferred operators list ATSPLR=?ATSPLR=index1, index2 Splr index1oper Splr index2oper ATSPLW=index, oper Atsplw Write an entry to the preferred operators listATSPLW=? Supplementary Service Commands AT+CACM Accumulated call meter ACM reset or queryAT+CACM=? AT+CACM? Atsacm Advice of charge and query of ACM and ACMmax ATSACM=?Atsacm Sacm n, acm, acmMax Ccmstr AT+CAMM Accumulated call meter maximum ACMmax set or query AT+CAMM=?AT+CAMM? +CAMM acmmax AT+CAOC Advice of Charge information AT+CAOC=?AT+CAOC? AT+CAOC AT+CCUG Closed User Group AT+CCUG=?+CCUGn, index, info AT+CCUG=n, index, info Infonum AT+CCFC=reason, mode, number, type, class, time AT+CCFC Call forwarding number and conditions controlAT+CCFC=? Timenum Call Forwarding active At+ccfc=0,4 At+ccfc=0,3,+493012345678,145At+ccfc=0,0 At+ccfc=4,2 +CME error operation not supported at+ccfc=5,2 To query the status of CFU for all classes AT+CCWA Call Waiting AT+CCWA=?AT+CCWA? Scwa Calling numberstr Type of numbernum CLI validitynum At+ccwa=1 At+ccwa=,1At+ccwa=,2 At+ccwa=1,1 AT+CHLD Call Hold and Multiparty AT+CHLD=?AT+CHLD=n Udub At+ccwa=1,1,1 +CCWA +491791292364,145,32,,0At+chld=2 Hello AT+CLIP Calling Line Identification Presentation AT+CLIP=?AT+CLIP? +CLIP number, type, , , alpha, CLI validity CLI has been withheld by the originator 10 AT+CLIR Calling Line Identification Restriction AT+CLIR=?AT+CLIR? +CLIRn, m 11 AT+COLP Connected Line Identification Presentation AT+COLP=?AT+COLP? +COLP number, type Typenum 12 AT+CPUC Price per unit and currency table AT+CPUC=?AT+CPUC? +CPUC currency, ppu AT+CPUC=EUR,0.10 +CME Error SIM PIN2 requiredAT+CPUC=EUR,0.10,8888 13 AT+CSSN Supplementary service notifications AT+CSSN=?AT+CSSN? +CSSI code Code 1num Code 2num 14 AT+CUSD Unstructured supplementary service data AT+CUSD=?AT+CUSD? AT+CUSD=n, strwrite, dcs Dcsnum Internet Service Commands Access is provided to the following Internet Services Maximum number of profiles defined / used Address notation Atsics Internet Connection Setup Profile ConParmTag valueATSICS=? ATSICS? ATSICS=conProfileId, conParmTag, conParmValue TypeAlphabet ARate Mode ConParmValuestrConParmValue-conTypestr ConParmValue-alphabetstr Example Default values of a CSD connection profile ProfileId1 Example Gprs connection profile Sici conProfileId, conState, numServices, conAddr Atsici Internet Connection InformationATSICI=? ATSICI? Checking Connection Profile Status ConState=2 Up Atsiss Internet Service Setup Profile SrvParmTag Smtp service ATSISS=? ATSISS?Siss srvProfileId, srvParmTag, srvParmValue ATSISS=srvProfileId, srvParmTag, srvParmValue Smtp POP3 AC75 AT Command Set Content-Type multipart/mixed PDelFlag SrvParmValuestr SrvParmValue-srvTypestrSrvParmValue-alphabetstr SrvParmValue-pCmdnum SrvParmValue-pDelFlagnum Atsisi Internet Service Information ATSISI=?ATSISI? Sisi UnackData Atsiso Internet Service Open ATSISO=? ATSISO? ATSISO=srvProfileId RemAddrstr SocketStatenumLocAddrstr SocketState=4 Atsisc=0 Siso Siso 4, Socket,3,3,0,0,10.10.0.18765534,0.0.0.00 ATSISC=srvProfileId Atsisc Internet Service CloseATSISC=? Atsisr Internet Service Read Data ATSISR=?ATSISR=srvProfileId, reqReadLength Sisr srvProfileId, urcCauseId CnfReadLengthnum ReqReadLengthUrcCauseIdnum RemainUdpPacketLengthnum Thisi SdataGrama RemainUdpPacketLength Atsisw Internet Service Write Data ATSISW=?Sisw srvProfileId, urcCauseId ReqWriteLengthnum EodFlagnum ReqWriteLengthOptServParamstr CnfWriteLengthnum Usage of parameter eodFlag No further user data is accepted Http / POP3 Atsico Internet Connection Open ATSICO=?ATSICO? Sico conProfileId, conParmTag, conParmValue ConParmTagstr ATSICC=conProfileId Atsicc Internet Connection CloseATSICC=? ATSISX=? Atsisx Internet Service ExecutionATSISX=service, conProfileId, address, request, timelimit InfoType =1 AtsicsPingInfoType =1 10.11.1 Example Ping MaxRTTnumMeanRTTnum Sisx Ping,2,1,4,4,0,0 Sisx Ping,3,1,415,1043,643 Atsise Internet Service Error Report ATSISE=?ATSISE=srvProfileId Sise srvProfileId, infoID, info Internet Service URC SIS SIS srvProfileId, urcCause, urcInfoId, urcInfoTextUrcCausenum UrcInfoIdnum UrcInfoId urcInfoText Information Elements Related to the Service ApplicationUrcInfoTextstr Information Elements Related to FTP Service FoId and the urcInfoText PPP LCP Failed Information Elements Related to Smtp Service Information Elements Related to Http ServiceInformation Elements Related to POP3 Service With Atsiso Selecting URC Mode or Polling ModeConfiguring Socket Listener ATSISI=0 Socket Client Sends Data via TCP Connection Polling ModeATSISO=0 ATSISC=0 Configuring and Using FTP Download URC ModeSocket client sends data via TCP connection with URCs Configuring and Using FTP Upload URC Mode Configuring Smpt Service Profile Sending Email URC Mode Sending Email Polling Mode Configuring POP3 Service Profile CET Retrieving Email URC ModeRetrieving Email Polling Mode Http Post Polling Mode Http GET Polling Mode Gprs Commands 11.1 AT+CGACT PDP context activate or deactivateAT+CGACT=? AT+CGACT? 11.1 AT+CGACT Cidnum Connect No Carrier Error +CME Error AT+CGANS=?AT+CGANS=response, L2P, cid Responsenum AC75 AT Command Set 11.3 AT+CGATT Gprs attach or detach AT+CGATT=?AT+CGATT? State=1 AT+CGANS command AT+CGAUTO=?AT+CGAUTO? +CGAUTO n AC75 AT Command Set AT+CGDATA=L2P, cid, cid 11.5 AT+CGDATA Enter data stateAT+CGDATA=? Automatic deactivation of PDP context during dial-up PPP 11.6 AT+CGDCONT Define PDP Context AT+CGDCONT=?AT+CGDCONT? +CGDCONT cid, PDPtype, APN, PDPaddr, dcomp, hcomp APNstr PDPaddrstrDcompnum Hcompnum AT+CGEQMIN=? AT+CGEQMIN? Guaranteed bitrate ULnum Guaranteed bitrate DLnumTraffic classnum Maximum bitrate ULnum SDU error ratiostr Residual bit error ratiostrMaximum SDU sizenum Delivery of erroneous SDUsnum Transfer delaynum Traffic handling prioritynum AT+CGEQREQ? 11.8 AT+CGEQREQ 3G Quality of Service Profile RequestedAT+CGEQREQ=? Traffic classnum Maximum SDU sizenum Transfer delaynum 11.9 AT+CGPADDR Show PDP address AT+CGPADDR=?AT+CGPADDR=cid,cid +CGPADDR cid, PDPaddress +CGQMIN cid, precedence, delay, reliability, peak, mean AT+CGQMIN=cid, precedence, delay, reliability, peak, meanAT+CGQMIN=? AT+CGQMIN? Delaynum Delay class PrecedencenumReliabilitynum Peaknum Meannum AT+CGDCONT=1,IP OK AT+CGQMIN= 11.11 AT+CGQREQ Quality of Service Profile Requested +CGQREQ cid, precedence, delay, reliability, peak, meanAT+CGQREQ=cid, precedence, delay, reliability, peak, mean AT+CGQREQ=? Delaynum AT+CGDCONT=1,IP AT+CGQREQ= +CGQREQ1,0,0,0,0,0 11.12 AT+CGREG Gprs Network Registration Status AT+CGREG=?AT+CGREG? +CGREG n, stat, lac, ci Plmn Stat=1 or stat=5 11.13 AT+CGSMS Select service for MO SMS messages +CGSMS serviceAT+CGSMS=? AT+CGSMS? Atsgact Query all PDP context activations ATSGACT=?ATSGACT? Sgact ifc, cid, state Sumnum ATSGAUTH? Atsgauth Set type of authentication for PPP connectionATSGAUTH=? ATSGCONF? Atsgconf Configuration of Gprs related ParametersATSGCONF=? AC75 AT Command Set Connect No Carrier 11.18 ATD*99# Request Gprs service ATD*99* calledaddress* L2P* cid#Calledaddressstr PPP 11.19 ATD*98# Request Gprs IP service ATD*98* cid# 11.20 ATH 11.21 ATS0 Using Gprs AT commands Examples AT+CGDCONT=1,IPAT+CGDCONT=2,IP, internet.t-d1.gprs AT+CGDCONT=1 AT+CGQREQ=1,2 AT+CGQREQ=1AT+CGACT=1,2 AT+CGACT= Using the Gprs dial command ATD By AT+CGDCONT FAX Commands FAX parametersFax Result Codes AT+FCLASS Parameter 12.2 AT+FCLASS Fax Select, read or test service class AT+FCLASS=?AT+FCLASS? AT+FCLASS=n 12.3 AT+FRH Receive Data Using Hdlc Framing AT+FRH=?AT+FRH=mod TIA/EIA-578 AT+FRM=mod 12.4 AT+FRM Receive DataAT+FRM=? 12.5 AT+FRS Receive Silence AT+FRS=time AT+FTH=mod 12.6 AT+FTH Transmit Data Using Hdlc FramingAT+FTH=? AT+FTM=mod 12.7 AT+FTM Transmit DataAT+FTM=? 12.8 AT+FTS Stop Transmission and Wait AT+FTS=time Short Message Service SMS Commands SMS parametersAckpdunum Cdatanum Ieianum LengthnumMaxnum Mem1str Mem3str MidnumPagenum Pagesnum Refnum SctsnumSeqnum Statstr Todanum TooanumToranum Toscanum 13.2 AT+CMGC Send an SMS command Error +CMS ErrorAT+CMGC=? +CMGC mr, scts OK Error +CMS Error 13.3 AT+CMGD Delete short messageAT+CMGD=? AT+CMGD=index +CMGF mode 13.4 AT+CMGF Select SMS message formatAT+CMGF=? AT+CMGF? AT+CMGL 13.5 AT+CMGL List SMS messages from preferred storeAT+CMGL=? AC75 AT Command Set 13.6 AT+CMGR Read SMS messages AT+CMGR=?+CMGR stat, fo, mr, ra, tora, scts, dt, st Data +CMGR stat, fo, ct, pid, mn, da, toda, length Data AC75 AT Command Set 13.7 AT+CMGS Send Short Message AT+CMGS=?+CMGS mr, scts +CMGS mr, ackpdu AC75 AT Command Set 13.8 AT+CMGW Write Short Messages to Memory AT+CMGW=?AT+CMGW +CMGW index AC75 AT Command Set 13.9 AT+CMSS Send short messages from storage AT+CMSS=?AT+CMSS=index, da, toda +CMSS mr, scts AT+CNMA=n AT+CNMA=?AT+CNMA AT+CNMI? 13.11 AT+CNMI New short Message IndicationAT+CNMI=? +CBM lengthCRLFpdu +CBM sn, mid, dcs, page, pagesCRLFdata+CDS lengthCRLFpdu +CDS fo, mr, ra, tora, scts, dt, st Unsolicited result code OK Error Error +CMS Error 13.12 AT+CPMS Preferred SMS message storageAT+CPMS=? AT+CPMS? AC75 AT Command Set 13.13 AT+CSCA SMS Service Center Address AT+CSCA=?AT+CSCA? +CSCA sca, tosca 13.14 AT+CSCB Select Cell Broadcast Message Indication AT+CSCB=?AT+CSCB? +CSCB mode, mids, dcss AT+CSDH? 13.15 AT+CSDH Show SMS text mode parametersAT+CSDH=? 13.16 AT+CSMP Set SMS text Mode Parameters AT+CSMP=?AT+CSMP? +CSMPfo, vp/ scts, pid, dcs Pidnum AT+CSMS? 13.17 AT+CSMS Select Message ServiceAT+CSMS=? Bmnum ATSCML=? AtscmlScml index, stat, fo, mr, ra, tora, scts, dt, st Scml index, stat, fo, ct Atscmr Read Concatenated Short Messages ATSCMR=? Atscms Send Concatenated Short Messages ATSCMS=? Scmw index Atscmw Write Concatenated Short Messages to MemoryATSCMW=? Atslms Atslms List SMS Memory StorageATSLMS=? ATSMGL=stat ATSMGL=?Atsmgl Smgo n, mode OK Error CME ErrorATSMGO=? ATSMGO? AC75 AT Command Set ATSMGR=? SmgrATSMGR=index See AT+CMGR Atssconf SMS Command Configuration ATSSCONF=?ATSSCONF? ATSSCONF=ra Atssda Set SMS Display Availability ATSSDA=?ATSSDA? SSDAda Atssmss Set Short Message Storage Sequence ATSSMSS=?ATSSMSS? Ssmss seq AT+CRSM=? SIM related Commands14.1 AT+CRSM Restricted SIM Access AT+CRSM=command, fileID, P1, P2, P3, data Commandnum+CRSM sw1,sw2,response FileIDnum Sw2num Responsestr 14.2 AT+CSIM Generic SIM Access AT+CSIM=length, commandLength of command or response string AT+CSIM=? AT+CSIM=14,A0A40000026F3A +CSIM 4,9F0F Atsatr Query SIMs Answer to Reset Data ATSATR=?Atsatr Satr response Atsxsm Extended SIM Access ATSXSM=command, fileID, P1, P2, P3, dataATSXSM=? Sxsm sw1, sw2,response 3445566778899AABBCCDDEEFF Sxsm Atscks Query SIM and Chip Card Holder Status ATSCKS=?ATSCKS? Scks mode, SimStatus Scks SimStatusnum&VATSCKS=1 Atsset Indicate SIM data ready ATSSET=?ATSSET? Ssim Ready Atscid Display SIM card identification number ATSCID=?Atscid Scid cid 14.8 AT+CXXCID Display card ID AT+CXXCID=?AT+CXXCID +CXXCID cid Remote SIM Access RSA Commands SAP server SAP client ATSRSA? Atsrsa Remote SIM Access ActivationATSRSA=? MuxChannum DevIdnumSapRolenum DataFormnum BeaconPernumDiscTypenum URC Srsa devId , sapRole , connState , linkChange ConnStatenum LinkChangeCausenum Atsrsm Remote SIM Access Message ATSRSM=?ATSRSM=RsaDevId, RsaMsgId, RsaMsgData, RsaMsgLen, RsaMsgRc Srsm RsaDevId, RsaMsgId, RsaMsgData, RsaMsgLen, RsaMsgRc MaxMsgSizenum ConnStatusnumCmdApdustr CmdApduLennum AT+CREG=1 ATSSET=1SRSA0 SCKS0 SAP Request Message Parameters SAP Response Message Parameters Establishing an RSA Connection in a PC Environment Related AT CommandsBluetooth scenario SAP Serial Interface Scenario Xsap SIM Application Toolkit SAT Commands Atssta SAT Interface ActivationATSSTA=? ATSSTA? SatProfilestr AlphabetnumAllowedInstancenum Sstn cmdTerminateValue Sstn SAT NotificationSstn cmdType Atsstgi SAT Get Information ATSSTGI=?ATSSTGI? Sstgi state, cmdType Atsstr SAT Response ATSSTR=?ATSSTR? Sstr state, cmdType Phonebook Commands Sort Order for Phonebooks 17.2 AT+CNUM Read own numbers AT+CNUM=?AT+CNUM +CNUM alpha, number, type 17.3 AT+CPBR Read from Phonebook AT+CPBR=?+CPBR 1-maxloc,nlength, tlength AT+CPBR=location1, location2 Tlengthnum MaxlocnumNlengthnum +CPBR1-100,20,17 17.4 AT+CPBS Select phonebook memory storage AT+CPBS=?+CPBS storage, used, total AT+CPBS=storage Usednum Totalnum 17.5 AT+CPBW Write into Phonebook AT+CPBW=?+CPBW 1-maxloc,nlength, list of supported types, tlength AT+CPBW=location, number, type, text Typenum AT+CPBW=,+431234567,145,international AT+CPBW=1 Atspbw Write into Phonebook with location report ATSPBW=?Spbw 1-maxloc,nlength, list of supported types, tlength ATSPBW=location, number, type, text Typenum ATSPBW=3 Atsdld Atsdld Delete the last number redial memoryATSDLD=? Atspbc Find first matching entry in sorted phonebook ATSPBC=?ATSPBC=schar Spbc index ATSPBD=storage Atspbd Purge phonebook memory storageATSPBD=? Atspbg Display phonebook entries in alphabetical order ATSPBG=?Spbg 1-used,nlength, tlength ATSPBG=index1, index2, RealLocReq RealLocReqnum AT+CPBR=27 Using Atspbg without RealLocReqUsing Atspbg with RealLocReq Atspbs Step through the selected phonebook alphabetically ATSPBS=?ATSPBS=value, RealLocReq Index-anum Counter value Index-bnumIndex-b=index-a+1 Index-cnum Internal-counternum At&fAtspbs=2 SPBS33,+49301234567,145,TomTailor At+cpbr=27 Audio Commands Audio programming model ATM Set monitor speaker mode ATL Set monitor speaker loudnessATLval Valnum 18.4 AT+CLVL Loudspeaker volume level AT+CLVL=?AT+CLVL? AT+CFUN=1,1 AT+CMUT? 18.5 AT+CMUT Mute controlAT+CMUT=? 18.6 AT+VTD Tone duration AT+VTD=?AT+VTD? Duration 18.7 AT+VTS Dtmf and tone generation AT+VTS=?AT+VTS=dtmfString AT+VTS=dtmf, duration Atsaic Audio Interface Configuration ATSAIC=?ATSAIC? Saic io, mic, ep, clock, mode, framemode FramemodenumSNFW ATSNFA? Atsnfa Set or query of microphone attenuationATSNFA=? OK atsnfa? Snfa OK atsnfs=4 OK atsnfa=1 OK atsnfi? Snfi 5,1 OK atsnfa? Snfa Atsnfd Atsnfd Set audio parameters to manufacturer default valuesATSNFD=? Atsnfi Set microphone path parameters ATSNFI=?ATSNFI? Snfi inBbcGain, inCalibrate Atsnfm Set microphone audio path and power supply Snfm MicSwitch, MicVccStateATSNFM=MicSwitch, MicVccCtl ATSNFM=? MicVccStatenum ATSNFO? Atsnfo Set audio output = loudspeaker path parameterATSNFO=? AC75 AT Command Set Atsnfpt Set progress tones ATSNFPT=?ATSNFPT? Snfpt pt ATSNFS? Atsnfs Select audio hardware setATSNFS=? ATSNFS=4 ATSAIC? ATSNFS=2 ATSAIC?Atsnfw ATSNFS=4 ATSAIC=2,1,1 Atsnftty Signal TTY/CTM audio mode capability ATSNFTTY=?ATSNFTTY? Snftty audioState Atsnfv Set loudspeaker volume ATSNFV=?ATSNFV? Snfv outStep Atsnfw Write audio setting in non-volatile store ATSNFW=? Atsrtc Ring tone configuration ATSRTC=?ATSRTC? Atsrtc Volumenum Hardware Related Commands Error OK19.1 AT+CCLK Real Time Clock AT+CCLK=? 19.2 AT+CALA Set alarm time AT+CALA=?AT+CALA? +CALA time, n, type, text Sysstart Airplane Mode +CALA text +CALA text AT+CALA= OK AT+CALA? Sysstart Airplane Mode +CALA Good MorningAtsmso Smso MS OFF OK Shutdown SAD diag +CME Error err Atsad Antenna DiagnosisATSAD=? Atsad Atsbc Battery Charge Control ATSBC=?ATSBC? SBC bcs, bcl, mpc SBC Overvoltage warning SBC Overvoltage shutdownBcsnum Bclnum Responses returned by read command Atsbv Battery/Supply Voltage ATSBV=?Atsbv SBV value Sctm n, m, temp ATSCTM=?ATSCTM? Tempnum Deferred shutdown SctmaSctmb Sctma Atssync Configure Sync Pin ATSSYNC=?ATSSYNC? SSYNCmode ME status indicated by status LED patterns AC75ATCV01.002 495 10/30/06 Confidential / Released ATSSPI? Atsspi Serial Protocol InterfaceATSSPI=? BasicConfigurationnum DelayOnenumDelayTwonum ExtendedSpiConfigurationnum Specifying Delay Time for I²C 2 , Selecting SPI Mode Selecting SPI Mode Transmitting Data over AT Interface Channel Open / Close Structure of Messages on the I²C Bus Message syntax Error Handling on the I²C Bus Structure of Messages on the SPI Not Acknowledge Example Using I²C Bus Example Transfer and Response Messages on SPI + 11 22 33 44 ... FF+ 44 55 66 77 88 99 AA BB + AA BB CC DD Atswdac Configure and Read PWM Signal for DAC ATSWDAC=?ATSWDAC? Swdac dc, oc, fq ATSWDAC=50,1,2 ATSWDAC=75ATSWDAC=80 ATSWDAC=0,0 Gpio Commands Atspio General Purpose IO Driver Open/CloseATSPIO=? ATSPIO=mode Atscpin Pin Configuration ATSCPIN=?ATSCPIN=mode, pinid, direction, startValue Pinidnum StartValuenum Atscpol Polling Configuration ATSCPOL=?ATSCPOL=mode, ioid Unsolicited Result Code Scpol ioid, value AC75 AT Command Set Atscport Port Configuration ATSCPORT=?Scport portid Portidnum ATSDPORT=portid Atsdport Delete a Port ConfigurationATSDPORT=? Sgio value ATSGIO=?ATSGIO=ioid ATSSIO=? ATSSIO=ioid, value Atsccnt Configure Pulse Counter ATSCCNT=?ATSCCNT? Sccnt action, mode, limit Using the Pulse Counter in Limit Counter Mode Limit ATSSCNT? Atsscnt Start and Stop Pulse CounterATSSCNT=? Using the Pulse Counter in Start-Stop Counter Mode Java related Commands Atsjra Run Java ApplicationATSJRA=? ATSJRA=appName ATSJNET? Atsjnet Set Dialup Network Access ParametersATSJNET=? Entry pointstr+CSCS Bearer servicestr+CSCSTimeoutnum Authentication mode for CSD and Gprs is always PAP Atsjotap Over The Air Application Provisioning ATSJOTAP=?ATSJOTAP? Atsjotap HTTPUserstr Http user name HTTPPwdstr Http password ApplDirstrDeststr Netuserstr Connect Jsec Ready Send Command Atsjsec Write Binary Java Security DataATSJSEC? Atsjsec Certificate contentstr Untrusted domainnum Miscellaneous Commands 22.1 A/ Repeat previous command line ATS3=n 22.2 ATS3 Set command line termination characterATS3? ATS4=n 22.3 ATS4 Set response formatting characterATS4? ATS5=n 22.4 ATS5 Write command line editing characterATS5? Atsfdl Enter Firmware Download Mode ATSFDL=?Atsfdl ATSFDL=mode OTA Firmware update Over-The-Air Restricted access to SIM data after SIM PIN authentication AppendixAT+CPBW=50,+4030123456789,145,Paul AT+CPBR=50,50 See AT+CLIR Star-Hash *# Network CommandsImei OK FAX SMS SMS+FAX Star-Hash Command Response Parameters Available AT Commands and Dependency on SIM PIN ATDmemn ATDn ATDstr ATO AT+CHLD AT+CLIP AT+CLIR AT+COLP AT+CPUC AT+CSSN AT+CUSD ATH ATS0 AT+CSIM Atsatr Atsxsm Atscks Atsset Atscid AT+CXXCID Atsnfpt Atsnfs Atsnftty Atsnfv Atsnfw Atsrtc AT\Q AT&C AT&D AT&S ATE AT+ICF AT+IFC ATA ATD ATS10 ATO ATD*99# AC75ATCV01.002 550 10/30/06 Confidential / Released AT+CRSM AT+CSIM Atsatr Atsxsm Atscks Atsset Atscid AT+CXXCID ATS3 ATS4 ATS5 Atsfdl AT Command Settings storable with AT&W Show ServiceMode, mt, bm, ds ATS0 Atslcc AT+CR Factory Default Settings Restorable with AT&F Service=3 Service=0Format=0 View=0, line=1 =0, m=0 =0, p=0 Summary of Unsolicited Result Codes URC Smgo mode +CGREG statSrsm RsaDevId, RsaMsgId, RsaMsgData, RsaMsgLen, RsaMs GRc Sctma m Sctmb mScpol ioid, value Sccnt time Alphabetical List of AT Commands AT+CHLD AT+CSCA Atsatr Atsjnet ATDmemn ATD*98#ATD*99# ATS3