Siemens AC75 manual Atsset Indicate SIM data ready, Atsset=?, Atsset?, Ssim Ready

AC75 AT Command Set

14.6 AT^SSET

s

14.6AT^SSET Indicate SIM data ready

After power-up and personalization (PIN entry if required) the ME starts reading data from SIM. The AT^SSET command controls the presentation of the "^SSIM READY" URC which indicates, on the corresponding serial channel, when the ME has finished reading SIM data. See Section 23.1, Restricted access to SIM data after SIM PIN authentication for further detail.

Syntax

Test Command

AT^SSET=?

Response(s)

^SSET:(list of supported <n>s)

OK

Read Command

AT^SSET?

Response(s)

^SSET: <n>

OK ERROR

+CME ERROR: <err>

Write Command

AT^SSET=[<n>]

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

- + + + + + + - + -

Unsolicited Result Code

^SSIM READY

The URC acknowledges to the user that SIM data is accessible.

Parameter Description

<n>(num)(&W)(&V)

URC presentation mode
0(&F)	Disable URC "^SSIM READY" indication.
1	Enable URC "^SSIM READY" indication.

AC75_ATC_V01.002	Page 412 of 569	10/30/06
Confidential / Released