AC75 AT Command Set

13.10 AT+CNMA

s

13.10AT+CNMA New Message Acknowledgement to ME/TE, only phase 2+

The write / execute command confirms successful receipt of a new message (SMS-DELIVER or SMS-STATUS- REPORT) routed directly to the TE. TA shall not send another +CMT or +CDS result code to TE until previous one is acknowledged. If ME does not receive acknowledgement within required time (network time-out), ME sends RP-ERROR to the network. TA shall automatically disable routing to TE by setting both <mt> and <ds> values of AT+CNMI to zero.

Syntax

Test Command

AT+CNMA=?

Response(s)

+CNMA: (list of supported <n>s)

OK

Exec Command

AT+CNMA

Response(s)

OK ERROR +CMS ERROR

Write Command

AT+CNMA=<n>

Response(s)

OK ERROR +CMS ERROR

Reference(s)

GSM 07.05

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

+

+

+

+

+

+

+

-

-

-

Parameter Description

<n>(num)

Parameter required only for PDU mode.

0

Command operates similarly as in text mode.

Notes

The execute / write command shall only be used when AT+CSMS parameter <service> equals 1 (= phase 2+).

The execute command can be used no matter whether text mode or PDU mode is activated. The write com- mand is designed for the PDU mode only.

If multiplex mode is activated (AT+CMUX=0) the AT+CNMI parameter will be set to zero on all channels, if one channel fails to acknowledge an incoming message within the required time.

AC75_ATC_V01.002

Page 377 of 569

10/30/06

Confidential / Released

 

 

Page 377
Image 377
Siemens AC75 manual At+Cnma=?, AT+CNMA=n