Siemens AC75 Atmoni Monitor idle mode and dedicated mode, Atmoni=?, ATMONI=period, Periodnum

AC75 AT Command Set

8.9 AT^MONI

s

8.9AT^MONI Monitor idle mode and dedicated mode

The AT^MONI command supplies information of the serving/dedicated cell. There are two ways to retrieve the information: once on request by using the execute command or automatically every <period> seconds by using the write command. To stop the periodic presentation type "AT" or "at".

Syntax

Test Command

AT^MONI=?

Response(s)

^MONI:(list of supported <period>s)

OK

Exec Command

AT^MONI

Response(s)

See: Section 8.9.1, AT^MONI responses

OK

Write Command

AT^MONI=<period>

Response(s)

See: Section 8.9.1, AT^MONI responses

OK ERROR +CME ERROR

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

- + + + + + + - - -

Parameter Description

<period>(num)

Display period in seconds 1...254

Notes

•The two header lines (see Section 8.9.1, AT^MONI responses) are output after every ten data lines.

•The length of following output lines exceeds 80 characters. Therefore a terminal program may draw a carriage return on a screen. However, this is not part of the response.

•If the ME is Java controlled, periodic retrieval of cell information using the write command AT^MONI=<period> is not supported. If periodic cell information is required simply repeat the execute com- mands at regular intervals.

•The parameters LAC and cell are presented as hexadecimal digits, the remaining parameters are composed of decimal digits.

AC75_ATC_V01.002	Page 210 of 569	10/30/06
Confidential / Released