Operating Other Manufacturers’ Video Equipment
To change the transmittable signals for operating another manufacturer’s VCR
1Press and hold STANDBY/ON 
VCR.
2Press VCR.
3Enter a manufacturer’s code using buttons 1 – 9, and 0.
Manufacturer | Codes |
JVC | 01*, 02, 03 |
Emerson | 10, 22 |
Gold Star | 11 |
Hitachi | 04 |
Mitsubishi | 12 |
NEC | 21 |
Panasonic | 07, 13 |
Philips | 09 |
RCA | 05, 06 |
Samsung | 20 |
Sanyo | 17, 18, 19 |
Sony | 14, 15, 16 |
Zenith | 08 |
* “01” is the initial setting.
4 Release STANDBY/ON 
VCR.
Now you can perform the following operations on the VCR:
STANDBY/ON | VCR: Turn on and off the VCR. |
VCR CH | Change the TV channels on the |
| VCR. |
After pressing VCR, you can perform the following operations on the VCR:
To change the transmittable signals for operating another manufacturer’s DVD player
1Press and hold STANDBY/ON 
DVD.
2Press DVD.
3Enter a manufacturer’s code using buttons 1 – 9, and 0.
Manufacturer | Codes |
JVC | 01* |
Panasonic | 02 |
Philips | 04 |
Pioneer | 03 |
Sony | 05 |
Toshiba | 06 |
Yamaha | 07 |
* “01” is the initial setting.
4 Release STANDBY/ON 
DVD.
Now you can perform the following operations on the DVD player:
STANDBY/ON 
DVD: Turn on and off the DVD player.
After pressing DVD, you can perform the following operations on the DVD player:
3: Start playing.
4: Return to the beginning of the current (or previous) chapter (or fast reverse for some models).
¢: Skip to the beginning of the next chapter (or fast forward for some models).
7: Stop playing.
8: Pause playing. To resume, press 3.
3: | Start playing. |
REW: | Rewind the tape. |
FF:
7:Stop playing or recording.
8:Pause playing. To resume, press 3.
REC PAUSE: Enter recording pause.
To start recording, press this button then 3.
5 Try to operate your VCR by pressing
STANDBY/ON 
VCR.
After pressing DVD, these buttons can be used for the DVD menu operations.
Note:
For detailed menu operations, refer to the instructions supplied with the discs
or the DVD player.
2
46
MENU
7/P 8
ENTER
10
When your VCR turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
5 Try to operate your DVD player by pressing
STANDBY/ON 
DVD.
When your DVD player turns on or off, you have entered the correct code.
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
32
