JVC RX-5060B manual Tv Ch +

Operating JVC’s Audio/Video Components

CD changer

After pressing CD-DISC, you can perform the following operations on a CD changer:

3:	Start playing.
4:	Return to the beginning of the current (or previous)
	track.
¢:	Skip to the beginning of the next track.
7:	Stop playing.
8:	Pause playing. To resume, press 3.
1 – 6, 7/P:	Select the number of a disc installed in a CD
	changer.

After pressing CD, you can perform the following operations on a CD changer:

1 – 10, +10: Select a track number directly. For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 30, press +10, +10, then 10.

Example:

•Selecting disc number 4, track number 12, and starting playback.

1 Press CD-DISC, then press 4.

2 Press CD, then press +10, 2.

If your CD changer is of 200-disc loading capability (except for XL-MC100 and XL-MC301), you can do the following operations

using the number buttons after pressing CD.

1Select a disc number.

2Then select a track number (always enter two digits).

3Press 3 to start playback.

Operating Video Components

VCR

You can always perform the following operations:

STANDBY/ON	VCR: Turn on or off the VCR.
VCR CH +/–:	Change the TV channels on the VCR.

After pressing VCR, you can perform the following operations on the VCR:

3:	Start playing.
REW:	Rewind the tape.

FF:Fast-forward the tape.

7:	Stop playing, recording, rewind and fast forward.
8:	Pause playing and recording. To resume, press 3.

REC PAUSE: Enter recording pause.

To start recording, press this button then 3.

DVD player

You can always perform the following operation:

STANDBY/ON DVD: Turn on or off the DVD player.

After pressing DVD, you can perform the following operations on the DVD player:

3: Start playing.

4: Return to the beginning of the current (or previous) chapter.

¢: Skip to the beginning of the next chapter.

7: Stop playing.

8: Pause playing. To resume, press 3.

After pressing DVD, these buttons

Examples:

can be used for the DVD menu operations.

2

• Selecting disc number 3, track number 2, and starting playback.

Press 3, then, 0, 2, then 3.

• Selecting disc number 10, track number 5, and starting playback.

Press 1, 0, then, 0, 5, then 3.

• Selecting disc number 105, track number 12, and starting

playback.

Press 1, 0, 5, then 1, 2, then 3.

Note:

It is required to press each button within 4 seconds in the above

procedure.

			4	6
	Note:		MENU
			7/P	8
	For detailed menu operations, refer to
			ENTER
	the instructions supplied with the discs
			10
	or the DVD player.
TV
You can always perform the following operations:
STANDBY/ON		TV: Turn on or off the TV.
TV CH +/–:		Change the channels.
TV VOLUME +/–:		Adjust the volume.
TV/VIDEO:		Set the input mode (either TV or VIDEO).

After pressing TV SOUND, you can perform the following operations on the TV:

1 – 9, 0, 100+ (+10): Select the channels.

RETURN (10): Alternate between the previously selected channel and the current channel.

32