Adjusting Sound
You can make sound adjustment to your preference after completing basic settings.
Basic Adjustment Items
On the following pages, you can adjust the following items:
•You can adjust only the items applicable to the current sound mode.
Items | To do | See page | |
DEQ 63HZ | Adjust equalizer pattern at 63 Hz. |
| 22 |
|
|
| |
DEQ250HZ | Adjust equalizer pattern at 250 Hz. | 22 | |
|
|
|
|
DEQ 1KHZ | Adjust equalizer pattern at 1 kHz. |
| 22 |
|
|
|
|
DEQ 4KHZ | Adjust equalizer pattern at 4 kHz. |
| 22 |
|
|
| |
DEQ16KHZ | Adjust equalizer pattern at 16 kHz. | 22 | |
|
|
|
|
SUBWFR LEVEL | Adjust the subwoofer output level. |
| 22 |
|
|
| |
FRONT L LEVEL | Adjust the left front speaker output |
| |
| level. |
| 22 |
|
|
| |
FRONT R LEVEL | Adjust the right front speaker output |
| |
| level. |
| 22 |
|
|
|
|
CENTER LEVEL | Adjust the center speaker output |
|
|
| level. |
| 22 |
|
|
|
|
SURR L LEVEL | Adjust the left surround speaker |
|
|
| output level. |
| 22 |
|
|
|
|
SURR R LEVEL | Adjust the right surround speaker |
|
|
| output level. |
| 22 |
|
|
|
|
EFFECT*1 | Adjust the effect level. |
| 22 |
CENTER TONE | Make the center tone soft or sharp. | 22 | |
|
| ||
PANORAMA CTRL*2 Add “wraparound” sound effect with |
| ||
|
| 22 | |
|
|
|
|
Basic Procedure | Remote |
NOT |
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
Ex. When adjusting the subwoofer level to “–3.”
1 Press ADJUST.
The last selected item appears on the display.
2Turn MULTI JOG until an item you want appears on the display.
•In this example, select “SUBWFR LEVEL.” For available items, see the list “Basic Adjustment Items.”
|
| 3 Press in MULTI JOG (PUSH SET). | |
Notes: | The current setting (or level) for the selected item appears on the | ||
|
| display. | |
*1 Adjustable when one of the DAP modes or Mono Film (see pages | |||
| |||
26 and 27) is in use.
*2 Adjustable when Pro Logic II Music is in use.
4 Turn MULTI JOG to select a setting you want or to make an adjustment as you like.
5 Press in MULTI JOG (PUSH SET).
6 Repeat steps 2 to 5 to set other items if necessary.
7 Press EXIT.
The source indication resumes on the display.
21
