Jackson 10AB, 10APRB, 10U One Year Limited Parts & Labor Warranty, Manufacturers Warranty

Page 2
MANUFACTURERS WARRANTY

MANUFACTURERS WARRANTY

ONE YEAR LIMITED PARTS & LABOR WARRANTY

 

 

ALL NEW JACKSON DISHWASHERS ARE WARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROM DEFECTS IN MATERIAL OR WORKMANSHIP, UNDER NORMAL USE AND OPERATION FOR A PERIOD OF (1) ONE YEAR FROM THE DATE OF PURCHASE, BUT IN NO EVENT TO EXCEED (18) EIGHTEEN MONTHS FROM THE DATE OF SHIPMENT FROM THE FACTORY.

Jackson MSC agrees under this warranty to repair or replace, at its discretion, any original part which fails under normal use due to faulty material or workmanship during the warranty period, providing the equipment has been unaltered, and has been properly installed, main- tained and operated in accordance with the applicable factory instruction manual furnished with the machine and the failure is reported to the authorized service agency within the warranty period. This includes the use of factory specified genuine replacement parts, purchased directly from a Jackson authorized parts distributor or service agency. Use of generic replacement parts may create a hazard and void war- ranty certification.

The labor to repair or replace such failed part will be paid by Jackson MSC, within the continental United States, Hawaii and Canada, during the warranty period provided a Jackson MSC authorized service agency, or those having prior authorization from the factory, performs the service. Any repair work by persons other than a Jackson MSC authorized service agency is the sole responsibility of the customer. Labor coverage is limited to regular hourly rates, overtime premiums and emergency service charges will not be paid by Jackson MSC.

Accessory components not installed by the factory carry a (1) one year parts warranty only. Accessory components such as table limit switch- es, pressure regulators, pre rinse units, etc. that are shipped with the unit and installed at the site are included. Labor to repair or replace these components is not covered by Jackson MSC.

This warranty is void if failure is a direct result from shipping, handling, fire, water, accident, misuse, acts of god, attempted repair by unau- thorized persons, improper installation, if serial number has been removed or altered, or if unit is used for purpose other than it was origi- nally intended.

TRAVEL LIMITATIONS

Jackson MSC limits warranty travel time to (2) two hours and mileage to (100) one hundred miles. Jackson MSC will not pay for travel time and mileage that exceeds this, or any fees such as those for air or boat travel without prior authorization.

WARRANTY REGISTRATION CARD

The warranty registration card supplied with the machine must be returned to Jackson MSC within 30 days to validate the warranty.

REPLACEMENT PARTS WARRANTY

Jackson replacement parts are warranted for a period of 90 days from the date of installation or 180 days from the date of shipment from the factory, which ever occurs first.

PRODUCT CHANGES AND UPDATES

Jackson MSC reserves the right to make changes in design and specification of any equipment as engineering or necessity requires.

THIS IS THE ENTIRE AND ONLY WARRANTY OF JACKSON MSC. JACKSON’S LIABILITY ON ANY CLAIM OF ANY KIND, INCLUDING NEGLIGENCE, WITH RESPECT TO THE GOODS OR SERVICES COVERED HEREUNDER, SHALL IN NO CASE EXCEED THE PRICE OF THE GOODS OR SERVICES OR PART THEREOF WHICH GIVES RISE TO THE CLAIM.

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING FOR FITNESS OR MERCHANTABILITY, THAT ARE NOT SET FORTH HEREIN, OR THAT EXTEND BEYOND THE DURATION HEREOF. UNDER NO CIRCUMSTANCES WILL JACKSON MSC BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, OR FOR THE DAMAGES IN THE NATURE OF PENALTIES, ARISING OUT OF THE USE OR INABILITY TO USE ANY OF ITS PRODUCTS.

ITEMS NOT COVERED

This warranty does not cover cleaning or deliming of the unit or any component such as, but not limited to, wash arms, rinse arms or strain- ers at anytime. Nor does it cover adjustments such as, but not limited to timer cams, thermostats or doors, beyond 30 days from the date of installation. In addition, the warranty will only cover the replacement of wear items such as curtains, drain balls, door guides or gaskets dur- ing the first 30 days after installation. Also, not covered are conditions caused by the use of incorrect (non-Commercial) grade detergents, incorrect water temperature or pressure, or hard water conditions.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents FOR JACKSON MODELS 10A 10AB 10APRB 10U HIGHER HOOD OPTION An Company10 SERIES, ELECTRICALLY HEATED, ROUND DISHMACHINES February 24 P/N 7610-100-01-00 Revision EONE YEAR LIMITED PARTS & LABOR WARRANTY MANUFACTURERS WARRANTYAPPLICABLE REVISIONMADE DETAILSNOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL Model Serial No Installation Date Service Rep. Name Phone No10 SERIES TABLE OF CONTENTS SECTION SPECIFICATION INFORMATION SECTION 1 SPECIFICATION INFORMATION 10 SERIES SPECIFICATIONS LEFT VIEW SECTION 1 SPECIFICATION INFORMATION 10A DIMENSIONSTOP VIEW FRONT VIEW10U ONLY SECTION 1 SPECIFICATION INFORMATION10AB/10APRB/10U DIMENSIONS 11 1/2”SECTION 1 SPECIFICATION INFORMATION 10 SERIES TABLE DIMENSIONS SECTION INSTALLATION/OPERATION INSTRUCTIONS SECTION 2 INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONSLEVEL THE DISHMACHINE The dishmachine is designed to operate while being level. This is important to prevent any damage to the machine during operation and to ensure the best results when washing ware. The unit comes with adjustable bullet feet, which can be turned using a pair of channel locks or by hand if the unit can be raised safely. Ensure that the top of the tub is level from side to side and from front to back before making any con- nections ALIGNING THE MACHINE Adjust the machine base to line up hole in table with hole in support block Fig PLUMBING THE DISHMACHINE All plumbing connections must comply with all applicable local, state, and national plumb- ing codes. The plumber is responsible for ensuring that the incoming water line is thoroughly flushed prior to connecting it to any component of the dishmachine. It is necessary to remove all foreign debris from the water line that may potentially get trapped in the valves or cause an obstruction. Any valves that are fouled as a result of foreign matter left in the water line, and any expenses resulting from this fouling, are not the responsibility of the manufacturer SECTION 2 INSTALLATION/OPERATION INSTRUCTIONS SECTION 2 INSTALLATION/OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS PREPARATIONSECTION 2 INSTALLATION/OPERATION INSTRUCTIONS DETERGENT CONTROL SECTION PREVENTATIVE MAINTENANCE SECTION 3 PREVENTATIVE MAINTENANCE PREVENTATIVE MAINTENANCE SECTION ELECTRICAL SCHEMATICS 10AB/10U 208/220V 1 PHASE L2 L110A 208/220V 1 PHASE 3 PHASESECTION 4 ELECTRICAL SCHEMATICS 10A WIRING DIAGRAM 208-230 VOLT, 60HZ, SINGLE PHASE10AB WIRING DIAGRAM 208-230 VOLT, 60HZ, SINGLE PHASE 10AB WIRING DIAGRAM 208-230 VOLT, 60HZ, THREE PHASE 9905-002-55-90a10APRB WIRING DIAGRAM 208-230 VOLT, 60HZ, SINGLE PHASE 9905-002-55-91a10APRB WIRING DIAGRAM 208-230 VOLT, 60HZ, THREE PHASE 9905-002-55-92aSECTION JACKSON MAINTENANCE REPAIR CENTERS SECTION 5 JACKSON MAINTENANCE & REPAIR CENTERS EMR SERVICE DIVISION 2626 PITTMAN DRIVE SILVER SPRING, MD GCS SERVICE INC. 1002 NANDINO BLVD. LEXINGTON, KYEMR SERVICE DIVISION 700 EAST 25TH STREET BALTIMORE, MD BANA PARTS INC. 1501 KUEBLE STREET HARAHAN, LA200 SALINA ST. SUITE 114 LIVERPOOL, NY HAWKINS COMMERCIAL APPLI1900 COLLEGE AVENUE ELMIRA HEIGHTS, NY 800 532-6127 FAXELMER SCHULTZ SVC. 540 NORTH 3RD STREET PHILADELPHIA, PA NORTHERN PARTS & SVC. 4874 S. CATHERINE STREET PLATTSBURGH, NY CANADAGCS/STOVE PARTS 2120 SOLANA STREET FORT WORTH, TX
Related manuals
Manual 67 pages 30.52 Kb

10U, 10AB, 10A, 10APRB specifications

The Jackson 10A, 10U, 10APRB, and 10AB series of dishmachines have made significant strides in commercial dishwashing technology. Designed for high efficiency and durability, these machines cater to various establishments, from restaurants to cafeterias, ensuring cleanliness and sanitation in a fast-paced environment.

The Jackson 10A model stands out for its advanced washing capabilities. Featuring a powerful pump and a unique wash arm design, it delivers an exceptional cleaning performance by ensuring thorough coverage of all dishware. This model is equipped with a high-temperature rinse option that sanitizes dishes effectively, meeting health department standards. Additionally, its energy-efficient heating elements contribute to reduced operational costs while maintaining optimal cleaning temperatures.

The Jackson 10U model is particularly notable for its user-friendly design and compact footprint. This makes it an ideal choice for smaller kitchens where space is at a premium. It boasts a high cycle speed, which allows for quick turnover of dirty dishes. The innovative control system lets operators easily set wash cycles and monitor machine performance, ensuring maximum efficiency and reducing water waste.

On the other hand, the Jackson 10APRB is engineered for versatility, capable of handling various types of dishware, including delicate glassware and sturdy pots. This model features adjustable shelves and a flexible design that accommodates different load sizes. The inclusion of an automatic chemical dispensing system ensures that the right amount of detergent is used, optimizing wash results while minimizing chemical costs.

The Jackson 10AB is designed for heavy-duty use, perfect for establishments with high dishwashing demands. This robust machine integrates a multi-stage filtration system to capture food particles and debris, prolonging the life of the appliance. Its high-speed wash cycles significantly enhance productivity, allowing for a steady stream of clean dishware with minimal downtime.

All models in the Jackson series are equipped with cutting-edge technology, including energy-efficient motors and low-water consumption features, making them environmentally friendly options for commercial kitchens. The advanced diagnostics and monitoring systems help operators troubleshoot any issues that arise, ensuring consistent operation and reducing maintenance time.

In conclusion, the Jackson 10A, 10U, 10APRB, and 10AB dishmachines exemplify innovation in commercial dishwashing technology. With features that emphasize efficiency, versatility, and durability, these machines are vital assets in any food service operation, delivering cleanliness and meeting rigorous health standards with ease.
Top Page Image Contents