Miele DA252-4, DA251-4, DA259-4 Plywood backing, To install a plywood backing board

Page 26

Plywood backing

The majority of the weight of the installed ventilation system will be supported by the canopy. Its mounting bracket must be firmly attached to the stud framing behind the drywall. If studs are not located in the required locations, a plywood backing (min. ½" (13 mm) thick) spanning at least two studs must be installed. Failure to adequately support the weight as stated may result in the ventilation system falling off the wall, causing personal injury and property damage.

(If plywood backing is not needed, proceed to "Appliance dimensions and Installation").

To install a plywood backing board

^Determine and mark the location of the retaining plate for the canopy as outlined on the Installation sheet.

^Make a cutting line 3" (76 mm) above and 3" (76 mm) below the outline of the retaining plate.

^Find the studs to the left and right of the mounting location by tapping the wall or using a stud finder.

^Mark the center of each of the studs with a vertical line.

Be careful not to damage any wiring or plumbing that may be located behind the wall. Make sure that the power supply to the area being worked in has been turned off at the breaker panel before cutting into the wall.

^Cut out the drywall along the marked

lines and replace it with plywood of a matching thickness (min. ½" (13 mm) thick). Tape the joints and refinish the wall.

^See enclosed installation sheet for instructions on how to install the appliance.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Operating and Installation Instructions Ventilation System Contents Important Safety Instructions Use Evacuate and Call the Fire Department Only ifInstallation To reduce the risk of fire only use metal ductworkFunctional description Guide to the appliance Canopy storage surface On/Off button Fan power level buttonsDelayed Shut Down Control panel Indirect light button Overhead light buttonIntensive setting Selecting the power levelAutomatically switching back the Intensive power level OperationFan performance Automatic Safety Shut Off Turning off the fanTurning the lighting on / off Dimming the lightingGrease filter timer Checking the grease filter timerReprogramming the grease filter timer Stainless steel Cleaning and CareCleaning the casing Stainless steel colored controlsCleaning the grease filters Grease filtersChanging the light bulbs Indirect lighting MieleCare After Sales ServiceRepairs Http//store.miele.comInstallation Instructions Page Disposal of an old appliance Caring for the environmentDisposal of packing material Installation accessories Hose clips for securing the exhaust ducting To install a plywood backing board Plywood backingElectrical data Grounding InstructionsAppliance dimensions and Installation Distance between cooktop and hood S Standard unit HProtective film InstallationInstallation instructions Air extraction Condensate trap Page Page

DA252-4, DA259-4, DA251-4 specifications

The Miele DA259-4, DA251-4, and DA252-4 are high-performance range hoods that exhibit Miele’s commitment to quality, design, and advanced technology. These models are specifically designed to enhance any kitchen environment while effectively removing smoke, steam, and odors produced during cooking.

One of the main features of these Miele hoods is their powerful suction capability. The DA259-4, for instance, boasts a maximum extraction rate that can efficiently deal with intense cooking sessions, ensuring a smoke-free kitchen area. Each model is equipped with multiple power settings, allowing users to adjust the suction according to their cooking needs, whether it’s searing meats or simmering sauces.

The design of these range hoods is both functional and aesthetically pleasing. They feature a sleek stainless-steel finish that integrates seamlessly with modern kitchens. The DA251-4 and DA252-4 models offer a dedicated option for under-cabinet installation or wall mounting, catering to various kitchen layouts and preferences.

One of the standout technologies in the Miele DA259-4 is the innovative CleanCover feature, which ensures that all components are easy to clean and maintain. This design philosophy extends to the filters as well, with removable grease filters that are dishwasher safe for hassle-free cleaning.

The hoods also incorporate advanced lighting technology to ensure optimum visibility while cooking. The integrated LED lights provide bright, energy-efficient illumination over the cooking area, making food preparation safer and more enjoyable.

Another significant characteristic of these models is their quiet operation. Miele has invested in sound insulation technology which minimizes noise levels without compromising suction performance. This means users can enjoy a peaceful cooking environment without the distraction of a loud range hood.

In terms of user convenience, the hoods come equipped with intuitive controls that are easy to navigate. Some models offer a remote control option, providing users the flexibility to adjust settings from a distance, making cooking more efficient.

Overall, the Miele DA259-4, DA251-4, and DA252-4 range hoods represent cutting-edge engineering paired with elegant design. They not only promise to keep your kitchen air clean but also enhance the overall cooking experience, making them a standout choice for any culinary enthusiast.
Top Page Image Contents