Miele DAG 1000, DA 6490, DA 6480, DAG 500 installation instructions Installation

Page 27

Installation

With the assistance of another person, lift the appliance into the prepared cutout. The top mounting brackets should rest on the countertop.

Secure the appliance to the countertop with 2 screws.

Alternatively, or additionally, the appliance can also be attached underneath the countertop with the angle brackets provided.

First, loosely screw the brackets into the sliding nuts in the housing, then push them up under the countertop.

Now tighten the brackets on the housing.

Carefully pre-drill the mounting holes into the countertop from underneath. Using screws of the appropriate length.

Level and align the appliance.

Push the bottom mounting bracket on each side down against the cabinet floor.

Mark the top edge of the mounting bracket on the housing and the mounting holes on the cabinet floor.

Image 27

Contents En US, CA Contents Important Safety Instructions To Reduce the Risk of a Cooktop Grease Fire UseEvacuate and Call the Fire Department Installation Functional description With the internal DAG 500 exhaust blower Not includedWith the DAG 1000 external blower Not included Description of the appliance Temperature warning light Power level settings Delayed shut down featureVent collar Raising the vent / Turning on the fan Selecting the power levelDelayed shut-off feature OperationTemperature warning § Cleaning and Care Cleaning the casingStainless steel Special instructions for control buttons Grease filtersCleaning the grease filters Repairs After Sales ServicePage Installation Instructions Page Caring for the environment Disposal of packing materialDisposal of an old appliance Appliance dimensions Exhaust duct connection diameters Cabinet dimensions Appliance dimensions Installation using the DAG 500 internal blower Appliance dimensions Installation preparation InstallationInstallation Installing the DAG 500 blower box on the front Venting direction towards the rear Mount the vent collar on the rear Installing the DAG 500 blower box on the rear Preparing the electrical connection Installation Installation with the DAG 1000 external blower Air extraction Only for Canada with the DAG 500 Internal blower Condensate trapThis Appliance Must be Grounded Electrical connectionElectrical connection if using an external blower Page Alteration rights reserved Nr 045 140

Related manuals

Manual 16 pages 25.65 Kb

Manual 40 pages 62.24 Kb

DAG 1000, DAG 500, DA 6480, DA 6490 specifications

Miele, a renowned German manufacturer known for its high-quality home appliances, offers a range of advanced range hoods designed to enhance the kitchen experience. Among these are the Miele DA 6480, DAG 1000, DA 6490, and DAG 500. Each model showcases innovative technologies and exceptional performance, making them stand out in the kitchen appliance market.

The Miele DA 6480 is a stylish wall-mounted range hood that offers optimal extraction rates while maintaining a quiet operation. With its powerful motor, it achieves an air extraction capacity of up to 620 m³/h, ensuring that even the most intense cooking odors are efficiently removed. The model features Miele’s patented CleanCover, which ensures easy cleaning and improves safety by providing an enclosed motor. In terms of design, the DA 6480 boasts a sleek glass and stainless steel finish that complements any modern kitchen aesthetic.

Next, the Miele DAG 1000 is a versatile downdraft extractor that can be easily integrated into an island or countertop setup. Its unique design allows it to rise up from the cooking surface when needed and retract when not in use, providing a clear sightline in the kitchen. The DAG 1000 features a powerful extraction rate of 700 m³/h and a filter saturation indicator, ensuring optimal performance. Its LED lighting adds visibility to the cooking area while enhancing the overall ambiance.

The Miele DA 6490 is another exceptional wall-mounted model that emphasizes energy efficiency and effective smoke extraction. This range hood offers a maximum extraction rate of 1000 m³/h, making it suitable for professional-grade cooking environments. Incorporating Miele’s innovative Con@ctivity technology, the DA 6490 can communicate with Miele cooktops, automatically adjusting extraction levels based on cooking activity. This feature ensures optimal air quality and energy use. The hood also features intuitive touch controls, allowing for easy operation.

Lastly, the Miele DAG 500 emphasizes simplicity and functionality. This downdraft model is designed for space-saving efficiency while still packing a punch with a powerful extraction capability of 500 m³/h. It is equipped with stainless steel grease filters that are dishwasher-safe, making maintenance a breeze. The DAG 500’s minimalist design seamlessly fits into any kitchen layout, providing both style and utility.

In summary, Miele's DA 6480, DAG 1000, DA 6490, and DAG 500 models exemplify the brand’s commitment to quality, innovation, and user convenience. With features that enhance performance, design aesthetics, and ease of maintenance, these range hoods are an excellent investment for any modern kitchen. Whether you require efficient air extraction, stylish integration, or advanced technology, Miele's range hoods deliver outstanding results.