Remote control
The buttons on the remote control have the same functions as the corresponding buttons on the main unit.
Note: When using your CD radio cassette on batteries, the Standby button on the remote handset can only be used to switch the unit off. To switch the unit on when using battery supply, use the Standby button on the main unit.
Batteries
1.Open the compartment on the rear of you remote control by sliding the cover in the direction of the arrow.
2.Insert two LR03 (AAA size) batteries into the small spaces in the battery compartment. Take care to ensure the batteries are inserted with the correct polarity as shown inside the battery compartment. Replace the battery cover.
Replacement of batteries
1.If the range of your infrared remote control seems to decrease, or if certain functions no longer operate, you should replace the batteries.
2.If your remote control is not to be used for any extended period of time it is recommended that the two LR03 batteries are removed from the handset.
Stand By
Play/Pause
Digital Sound
Control
Stop
UP / F.Skip
Volume
DOWN /B.SkipRandom
CD 9912
19