Radio operation
note : the two LR6 batteries provide power for the radio memory and must be fitted at all times.
1.Set the Function switch to the 'Radio' position.
2.Adjust the Volume control until a hissing sound is heard.
3.Repeatedly press and release the Band button until the required waveband appears in the display. On FM fully extend the Telescopic aerial. On MW and LW rotate your radio for best reception.
4.Press and hold down either the UP 
or DOWN 
buttons until the frequency in the display begins to change rapidly. Release the button.
5.Your radio will scan the selected waveband, stopping each time it finds a station of sufficient strength. Adjust the Volume control to the required level.
6.To search for additional stations repeat the above procedure. Search
tuning may be stopped by a single press on either the UP 
or
DOWN 
buttons.
7.To tune to a weak station repeatedly press and release the UP 
or DOWN 
buttons until the correct frequency is displayed or until reception is best.
8.On FM if the station being received is weak some hiss may be audible, to reduce the hiss set the FM mode switch (located on the rear of the unit) to the 'Mono' position.
UP/
F.Skip
DOWN/
B.Skip
Function
CD
Tape
Radio
BandVolume
7