Miele DA5990W, DA5980W, DA5960W Electrical connection, Grounding Instructions USA and Mexico only

Page 32

Electrical connection

￿WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

All electrical work should be performed by a qualified electrician in strict accordance with national regulations (for USA: ANSI-NFPA 70) and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous.

Ensure that power to the appliance is OFF while installation or repair work is performed.

￿Verify that the voltage, load and circuit rating information found on the data plate (located behind the grease filter), match the household electrical supply before installing the hood.

￿Use only with ventilation hood cord-connection kits that have been investigated and found acceptable for use with this model hood.

If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele’s Technical Service Department.

￿WARNING:

THIS APPLIANCE MUST BE GROUNDED

Grounding Instructions (USA and Mexico only)

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing a path of least resistance. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING - Improper grounding can result in a risk of electric shock.

If there is any doubt, have the electrical system of the house checked by a qualified electrician.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance.

Important (USA and Mexico only)

The hood comes equipped with a 4 ft (1.2 m) power cord with a NEMA 5-15 molded plug for connection to a

120 VAC, 60 Hz, 15 A power outlet.

Important (Canada only)

To increase security before the machine is installed, it is recommended to install a protective switch (30 mA).

Important (Canada only)

The hood must be hard wired accordingly:

Black/Red wire: connect to L1 (live)

White wire: connect to N (neutral)

Green wire: connect to GND (ground)

32

Image 32
Contents En US, CA Contents Important Safety Instructions Use To Reduce the Risk of a Cooktop Grease FireEvacuate and Call the Fire Department Installation Air extraction Recirculation mode Functional descriptionGuide to the Ventilation System Only in recirculation mode Turning on the fan Selecting the power levelOperation Fan performance Turning the lighting On/Off Automatic Safety Shut OffTurning off the fan Cleaning and Care Cleaning the casingStainless steel Stainless steel colored controlsRemoving the grease filter Cleaning the grease filter Insert the charcoal filter Changing the light bulbs MieleCare After Sales ServiceRepairs Installation Instructions Page Disposal of an old appliance Caring for the environmentDisposal of packing material Appliance dimensions For recirculation mode only 4 and only outlet installation Distance between cooktop and hood S Miele Cooktops Non-MieleAppliance dimensions Installation accessories Protective shields Vent collarReducing collar 6 locking nuts for securing the unitTo install a plywood backing Plywood backingDismantling InstallationProtective film Air extraction Condensate trap Electrical connection Grounding Instructions USA and Mexico onlyImportant USA and Mexico only Important Canada onlyTechnical data Page Page Alteration rights reserved Nr 771 660

DA5980W, DA5960W, DA5990W specifications

The Miele DA5990W, DA5960W, and DA5980W are part of Miele's range of high-performance range hoods designed to enhance your cooking experience while ensuring a clean and fresh kitchen environment. These models are well-known for their stunning aesthetics, robust construction, and cutting-edge technology.

The DA5990W is particularly distinguished by its sleek design and powerful performance. It features a high extraction rate, ensuring that smoke, odors, and grease are efficiently removed from your kitchen. With intuitive touch controls, it offers ease of use, allowing you to adjust the fan speed and lighting with minimal effort. The integrated lighting adds a touch of elegance while illuminating your cooking area effectively.

DA5960W offers a similar blend of style and functionality but emphasizes energy efficiency. This model employs advanced LED lighting that consumes less power while providing ample brightness. The unit is designed with multiple fan speeds, allowing users to customize the ventilation power based on cooking needs. Its CleanCover design also facilitates easy cleaning, ensuring that the hood maintains its appearance over time.

The DA5980W stands out with its innovative technology that integrates seamlessly into modern kitchens. Equipped with Miele's SmartControl, this model can be connected to a smart home system, allowing for remote operation and monitoring via smartphone. The automatic sensor function adjusts the fan speed according to the intensity of cooking, optimizing performance while minimizing noise levels.

All three models incorporate Miele's renowned filter systems, featuring stainless steel grease filters that are dishwasher safe, making maintenance a breeze. The models are designed to enhance not only air quality but also the overall culinary experience, bringing a blend of efficiency and sophistication to your kitchen.

Moreover, these Miele hoods are designed to operate quietly, which is an essential feature for any home chef who values a peaceful cooking environment. With a range of innovative features tailored to meet the needs of modern households, the DA5990W, DA5960W, and DA5980W remain top choices for anyone looking for premium kitchen ventilation solutions. Miele's commitment to quality and performance is evident in these models, ensuring that they are an investment in both health and home aesthetics.