Miele DA 217-2 Protective sheet, Directional unit, Reducing collar, locking nuts for securing

Installation

b2 recirculation grilles (for recirculation mode only)

c2 protective sheets

for use when fitting the tower.

d1 protective sheet

for use when fitting the tower.

e1 directional unit

(for recirculation mode only)

f1 flexible aluminium hose for con- necting the directional unit to the ex- haust socket on the motor unit (not on EXT models).

g2 hose clips for securing the ex- haust ducting.

h1 reducing collar

for exhaust ducting ø 125 mm (not on EXT models).

i1 non-return valve for fitting into the exhaust socket on the motor unit (for ex- traction mode only, not on EXT models).

j1 exhaust connection for fitting in the canopy (only with EXT models).

kUpper retaining plate B for secur- ing the extension piece.

lMiddle retaining plate C for addi- tional stability of the tower.

mLower retaining plate A for secur- ing the canopy and the motor unit.

12 large headed screws 5 x 40 mm

and

12, S 8 plugs for securing the retaining plates and the canopy.

2 M 6 locking nuts for securing the

motor unit/control unit.

4 screws 3.9 x 7.5 mm for securing the tower and the extension piece.

4 screws 4.2 x 13 mm for securing the exhaust socket in the canopy (only with EXT models).

23