Miele DA 216-2 EXT, DA 219-2 EXT, DA 217-2 Electrical connection, Important UK

Page 36

Electrical connection

All electrical work should be under- taken by a suitably qualified and competent person in strict accord- ance with national and local safety regulations.

Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer can not be held responsible for unauth- orised work.

Ensure power is not supplied to the appliance while installation or repair work is being carried out.

U.K., IRL, NZ, ZA: The cooker hood is supplied for connection to an a.c.

230 V single phase 50 Hz supply.

AUS: The cooker hood is supplied for connection to an a.c. single phase 240 V, 50 Hz supply.

The voltage, rated load and fusing are given on the data plate. This is visible when the grease filters have been removed. Ensure that these match the household mains supply.

For U.K.: Connection should be made either by a double pole fused spur con- nection unit, or a fused plug and a suit- able switched socket. The On-Off switch should be easily accessible after the appliance has been built in. When switched off there must be an all- pole contact gap of 3 mm in the switch (including switch, fuses and relays ac- cording to EN 60 335).

If the socket is not accessible after in- stallation (depending on country) an ad- ditional means of disconnection must be provided for all poles.

For extra safety it is advisable to install a residual current device (RCD) with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100 Section 739).

Do not connect via an extension lead.

Important UK

If the appliance is fitted with a non-re- wireable plug (BS 1363 UK) and the socket outlets are not suitable for the plug supplied, or if the existing plug needs to be replaced by a new one, the old plug will need to be cut off and an appropriate plug fitted. The fuse car- rier and the fuse should be removed from the old plug and disposed of. The plug cut from the cable should then be disposed of, and on no account be in- serted into any socket elsewhere in the house (electric shock hazard).

The fuse cover must be re-fitted when changing the fuse and if the fuse cover is lost the plug must not be used until a suitable replacement is obtained.

The colour of the correct replacement cover is that of the coloured insert in the base of the plug or the colour that is embossed in words in the base of the plug (as applicable to the design of plug fitted).

The correct fuse rating of the replace- ment fuses that are ASTA approved to BS 1362 should be fitted. Replacement fuse covers may be purchased from your local electrical suppliers or Service agent.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents GiWOZ Contents Caring for the environment Disposal of packing materialDisposal of your old appliance Technical safety Correct usageUse Installation Appliances with external fans Description of the appliance Touch control for the grease filters Touch control for Active charcoal filtersFunctional description Air extractionAir recirculation An external fanTo switch the fan on Selecting the power levelIntensive setting OperationTo switch the fan off Switching the lighting onTo switch the lighting off Safety cut-outFilter operating hours counter Reading the filter operating hours counterProcedure Altering the filter operating hours counterOperation Cleaning and care HousingStainless steel ClothGrease filters Fitting / replacing the active charcoal filters Changing a light tube Appliance dimensions Connection for air extraction Installation Assembly partsProtective sheet Directional unitReducing collar 6 locking nuts for securingRetaining plates Retaining plate aRetaining plate B Retaining plate CCanopy Motor unit Control unit Electrical connection Air extraction Recirculation Extension pieceRecirculationExtraction Fitting the tower Installation Connection for air extraction Condensate trap Electrical connection Important UKThis Appliance Must be Earthed After Sales Service Technical data Fan performanceActive charcoal filter Miele active charcoal filter DKF Alteration rights reserved / 44

DA 219-2, DA 217-2, DA 219-2 EXT, DA 216-2 EXT, DA 216-2 specifications

Miele has consistently set the gold standard in kitchen appliances, and the DA 217-2, DA 216-2 EXT, DA 219-2, and their counterparts are no exception. These range hoods exemplify Miele’s commitment to quality, innovation, and superior performance.

The DA 217-2 is known for its sleek design and powerful ventilation capabilities. It offers a maximum extraction rate of up to 700 m³/h, ensuring that even the most intense cooking sessions leave your kitchen smoke-free and fresh. One of its standout features is the integrated clean air function, which circulates air for 10 minutes after cooking to remove lingering odors, providing a cleaner environment.

Similarly, the DA 216-2 EXT stands out with its extendable design, making it versatile for various kitchen layouts. This model also boasts a powerful extraction rate and features Miele’s advanced noise reduction technology. This ensures that users can enjoy a quiet cooking experience without distracting noise from the hood.

The DA 219-2 offers a combination of efficiency and modern style. With its elegant appearance, it seamlessly blends into contemporary kitchen designs while delivering strong performance. Equipped with an efficient motor and smart sensors, this model adjusts the extraction power according to cooking intensity, optimizing energy consumption.

In addition to their robust functionality, Miele hoods are built with user convenience in mind. They feature intuitive controls, including easy-to-use touch sensors and remote control options. This allows for effortless operation, even during busy cooking moments.

All these models incorporate high-quality materials, ensuring longevity and easy maintenance. The stainless-steel finish is not only aesthetically pleasing but also resists fingerprints, making cleaning simple. The grease filters are designed for easy removal and cleaning, with some models offering dishwasher-safe components.

Overall, Miele’s DA 217-2, DA 216-2 EXT, DA 219-2, and DA 216-2 models represent a perfect blend of functionality, aesthetics, and technology. They cater to modern cooking needs, ensuring that each kitchen is equipped with the best in performance while enhancing the overall cooking experience. Miele continues to demonstrate its leadership in the market with these innovative solutions.
Top Page Image Contents