Miele DA 3160, DA 3190 installation instructions Condensate trap

Page 33

Connection for air extraction

Important:

If the exhaust ducting is to run through rooms, ceiling space etc. where there may be great variations in temperature between the different areas, the problem of condensation will need to be addressed. The exhaust ducting will need to be suitably insulated.

Condensate trap

(optional extra)

In addition to insulating the exhaust ducting, we recommend that a suitable condensate trap is also installed to collect and evaporate any condensate which may occur. Condensate traps are available for ￿ 125 mm or

￿150 mm ducting.

When installing a condensate trap, ensure that it is positioned vertically and if possible directly above the exhaust connection. The arrow on the housing indicates the direction of air-flow.

33

Image 33
Contents Operating and installation instructions Cooker hood Contents Caring for the environment Disposal of the packing materialDisposal of your old appliance Safety with children Technical safetyCorrect application Page Page Page Correct use Correct installationAccessories Guide to the appliance Drop-down lightshield to conceal control panel Description of the functions Air extractionAir recirculation Operation Safety cut-out Automatic switch-off of the Intensive settingHousing Cleaning and careImportant for appliances with stainless steel housing General notesGrease filter ControlsImportant for DFB aluminium lightshields Cleaning the grease filters in the dishwasher Cleaning the grease filters by handFitting and replacing the charcoal filter Changing a halogen lamp Appliance dimensions Safety distance between hob and cooker hood Installation accessories InstallationDML 300 installation kit optional accessory Conversion kit for recirculation modeHose clips Non-return flapInstallation Positioning the appliance in the wall housing unit Installation Installation Secure the spacer strip to the back Weight of a lightshield matching existing furniture Attaching the lightshieldAligning the deflector plate Replacing the grease filter Set up for extraction mode Electrical connection Set up for recirculation modeConnection for air extraction Condensate trap Electrical connection Connection to a window contact switch Operation with DSM 400 control modulePotential free connection Installation Connection to a light switchAfter sales service Technical data Page Alteration rights reserved Nr 794 960
Related manuals
Manual 36 pages 17.1 Kb Manual 1 pages 26.41 Kb