4. FRONT PANEL
Power Switch: Turns on the main power for the ampli- fier. When the power is on, the LED will be illuminated.
5. BACK PANEL CONNECTIONS
Line Input: This line input is a sensing | LINE INPUT | |
SENSING | ||
input that will activate the | L | |
when an audio signal is present. When | ||
| ||
there is no audio, the amplifier will go |
| |
into standby or default back to the | R | |
|
POWER
Speaker Level Input: The speaker level input is a sensing input that will automatically switch the DPA-
1.2from the default input to the speaker level input. This input would be used in place of the line audio input. An amplified signal from a smaller amplifier or television can be amplified by the
Gain Controls: Left and Right gain con- |
|
|
|
|
trols independently adjust the sound |
|
| GAIN | |
level for each channel. When in the |
|
| ||
L | R | |||
bridge mode, only the right control |
|
|
|
|
|
|
|
| |
is used. |
|
|
|
|
Stereo / Mono Switch: The Stereo /
Mono switch selects stereo or mono for the speaker outputs. In the Mono position, each Left and Right output is Mono. The Mono portion is also used for bridged operation.
Video Input: The Video Input is a sensing input that will activate the
signal is present. When there is no video, the amplifier will go into standby or default back to the
AMPLIFIED INPUT
SENSING |
DEFAULT
AMPLIFIED INPUT
STEREO
BRGD *
MONO
6