Russound DPA-1.2 Specifications, Audio power output Continuous 35W @ 8 Ohms, 45W @ 6 Ohms

Page 9

6. SPECIFICATIONS

Audio power output: Continuous 35W @ 8 Ohms, 45W @ 6 Ohms.

Frequency response: 20HZ to 20KHZ -0.3dB. Total harmonic distortion: 0.05% 8 Ohm .075% 6 Ohm

Input sensitivity: 400mV line Input impedance: 22k Line Input

Signal to noise ratio: 85dB Input trigger: 12VDC 10k

Output trigger: 12VDC 100mA Auto off delay time: 2 to 10 minutes

Primary fuse: T2.0A /250V

Power requirements: Factory set for 120 VAC 60Hz or 230 VAC 50Hz.

2 terminal detachable power cord For 230VAC operation, use a power cord (not supplied) rated for 240VAC 2A or higher.

Weight: 9 lbs.

Dimensions: 6”W x 10”D x 3.5”H

9

Image 9
Contents DPA-1.2 Safety Instructions Contents Introduction Possible System ConfigurationsVideo Back Panel Connections Front PanelMono Bridged Operation Includes detachable 2 terminal power cord Audio power output Continuous 35W @ 8 Ohms, 45W @ 6 Ohms SpecificationsWarranty Page Forbes Rd. Newmarket, NH 03857, USA Fax