Miele M.-Nr. 09 920 730 installation instructions Frequently asked questions

Page 31

Frequently asked questions

With the aid of the following guide minor problems can be corrected without a ser- vice call.

Repairs should only be carried out by a qualified and trained person in strict accordance with local and national safety regulations. Unauthorized repairs could cause personal injury or machine damage and may void the warranty.

Issue

Possible fault

Solution

The refrigerator does

The machine is not

Check whether the appliance

not get cold.

turned on.

is switched on at the main

 

 

switch. The temperature

 

 

display must be lit up.

 

 

 

 

The machine is not

Check that the plug is

 

plugged in.

correctly inserted in the power

 

 

outlet.

 

 

 

 

Check that the fuse has

Reset the circuit breaker.

 

not tripped.

 

 

 

If the breaker trips again the

 

 

appliance or the outlet may be

 

 

defective. Contact Miele or a

 

 

qualified electrician.

 

 

 

 

The temperature is set

Check the display.

 

incorrectly.

 

Issue

Possible fault

Solution

The temperature in

Select a warmer

See "Selecting the correct

the refrigerator is

temperature.

temperature".

too low.

 

 

The SuperCool function

If, nessary turn off the

 

 

is still on.

SuperCool function.

 

 

 

 

The door is not closed.

Check that the door has been

 

 

closed properly.

 

 

 

 

A large amount of food is

This makes the compressor

 

put in the refrigerator at

run longer, causing the

 

the same time.

temperature to fall

 

 

automatically.

31

Image 31 Contents
Operating and Installation Instructions Refrigerator Contents Contents Electrical Safety Important Safety InstructionsUse InstallationFollowing applies to stainless steel appliances Disposal of your old applianceGuide to the refrigerator Control panel Before use Before using for the first timeTurning the appliance On/Off Using the settings SettingsTurning the button sound On/Off Custom settingsFunction Display text Turning off for longer periods of time Temperature alarm Temperature and door alarmDoor alarm Temperature range Setting the temperatureSetting the temperature in the refrigerator Temperature displayTemperature unit Fahrenheit/Celsius Humidity Storage temperaturesUsing the SmartFresh drawers SmartFresh drawersFoods that are best stored under dry conditions Tips for storing food SmartFresh drawersFoods that are best stored under moist conditions Coldest area Using the refrigerator efficientlyDifferent storage zones Warmest areaSwitching off SuperCool Switching on SuperCoolSuperCool Refrigerator and SmartFresh drawers Automatic defrostReplacing the drawer Adjusting the interior fittingsMoving the shelves Deli drawerSmartFresh drawer Removing the storage shelf from above the deli drawer Adjusting the door shelvesTo remove the shelf above the SmartFresh drawers Remove the cleaner promptly Cleaning and careTo better maintain your appliance avoid the following Appliance doors Before cleaning Cleaning the interior and accessoriesAluminum frames Humidity filters Ventilation slits After cleaningDoor seals Upper lighting Changing the light bulbSide lighting Frequently asked questions For too long Issue Possible fault Solution Compressor kicksAlarm indicator is On very frequentlySssrrrrr Normal noises What causes them? BrrrrrBlub, blub ClickMieleCare After sales servicePage Installation Instructions Disposing of the packaging materials Caring for the environmentInstallation site InstallationClimate Range Installation Ventilation Installation nicheBase Furniture/fixturesSingle column Installation optionsInstallation without a partition using the Merging Kit Stainless steel panelsFrom 5/8 16 mm to 6 5/16 160 mm Installation with partition using the Merging KitInstallation with partition without using the Merging Kit Side panelsAdjusting the door opening angle optional accessory 19X3 SF DimensionsDoor dimensions open min 18X3 SFNiche dimensions 18X3 SF 15 381 mm 19X3 SF 18 458 mm Power supplyBefore you begin Installing the applianceTools needed for installation Optional accessoriesBefore installation Aligning the housing unit Check the installation nicheRemoteVision module installation Preparing the installation niche Anti-tip brackets Mounting AccessoriesInstalling the appliance Securing an alternative anti-tip device Sliding the appliance into the installation space Aligning the appliance Attaching the toe-kick cover Attaching the appliance to the installation nicheMounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel MasterCool control panel options for RemoteVision Status indicators Description of functionSelectable Description of function Options Page Page 1803 SF, K 1903 SF En US, CA Nr 920 730