Miele M.-Nr. 09 920 730 installation instructions Humidity filters

Page 27

Cleaning and care

Humidity filters

The two humidity filters, located above the SmartFresh drawers, must be removed for cleaning.

Remove the SmartFresh drawer.

Remove the filter mat.

Clean the filters by rinsing them with lukewarm water.

Unhook the filter cover in each side of the drawer and remove them along with the filters downwards starting from .

Do not clean in a dishwasher or washing machine. This will damage the filter.

Air-dry the filters.

Place the filters back in the filter cover.

Put the filter cover back in place, inserting the rear hooks first.

Re-insert the SmartFresh drawer.

27

Image 27

Contents

Operating and Installation Instructions Refrigerator Contents Contents Electrical Safety Important Safety InstructionsUse InstallationFollowing applies to stainless steel appliances Disposal of your old applianceGuide to the refrigerator Control panel Before using for the first time Before useTurning the appliance On/Off Using the settings SettingsCustom settings Turning the button sound On/OffFunction Display text Turning off for longer periods of time Temperature and door alarm Temperature alarmDoor alarm Temperature range Setting the temperatureSetting the temperature in the refrigerator Temperature displayTemperature unit Fahrenheit/Celsius Humidity Storage temperaturesUsing the SmartFresh drawers SmartFresh drawersTips for storing food SmartFresh drawers Foods that are best stored under dry conditionsFoods that are best stored under moist conditions Coldest area Using the refrigerator efficientlyDifferent storage zones Warmest areaSwitching on SuperCool Switching off SuperCoolSuperCool Refrigerator and SmartFresh drawers Automatic defrostReplacing the drawer Adjusting the interior fittingsMoving the shelves Deli drawerSmartFresh drawer Adjusting the door shelves Removing the storage shelf from above the deli drawer To remove the shelf above the SmartFresh drawers Cleaning and care Remove the cleaner promptlyTo better maintain your appliance avoid the following Appliance doors Before cleaning Cleaning the interior and accessoriesAluminum frames Humidity filters After cleaning Ventilation slitsDoor seals Upper lighting Changing the light bulbSide lighting Frequently asked questions For too long Issue Possible fault Solution Compressor kicksAlarm indicator is On very frequentlySssrrrrr Normal noises What causes them? BrrrrrBlub, blub ClickMieleCare After sales servicePage Installation Instructions Disposing of the packaging materials Caring for the environmentInstallation Installation siteClimate Range Installation Ventilation Installation nicheBase Furniture/fixturesSingle column Installation optionsInstallation without a partition using the Merging Kit Stainless steel panelsFrom 5/8 16 mm to 6 5/16 160 mm Installation with partition using the Merging KitInstallation with partition without using the Merging Kit Side panelsAdjusting the door opening angle optional accessory 19X3 SF DimensionsDoor dimensions open min 18X3 SFNiche dimensions 18X3 SF 15 381 mm 19X3 SF 18 458 mm Power supplyBefore you begin Installing the applianceTools needed for installation Optional accessoriesBefore installation Aligning the housing unit Check the installation nicheRemoteVision module installation Preparing the installation niche Anti-tip brackets Mounting AccessoriesInstalling the appliance Securing an alternative anti-tip device Sliding the appliance into the installation space Aligning the appliance Attaching the toe-kick cover Attaching the appliance to the installation nicheMounting the air separator Electrical connection RemoteVision optional accessory Accessing the RemoteVision control panel Status indicators Description of function MasterCool control panel options for RemoteVisionSelectable Description of function Options Page Page 1803 SF, K 1903 SF En US, CA Nr 920 730