Miele PG 8050I manual Plumbing, Water inlet

Page 69

Plumbing

Water inlet

￿Water in the machine must not be used as drinking water.

–The machine must be connected to the water supply in accordance with local and national regulations.

–The water supply must meet or surpass all applicable tap water codes.

High iron content can lead to rust formation in the appliance and on the items washed.

If the chloride content in the water supply is above 100mg/l, the risk of corrosion is greatly increased.

–The washer is constructed so it may be connected to a water supply without an extra non-return valve, unless required by code.

–Water in certain regions shows precipitations. In this case the machine must only be used with a water softener unit.

–The water pressure (flow rate) must be a minimum of 7.25 psi.

If the water pressure (flow rate) is below 29 psi, the filling time is automatically extended.

The max. permitted static pressure is 145 psi.

If the water pressure is not in the range of 7.25 to 145 psi the "Fill/Drain" indicator may come on and the fault code "F2E" may show in the display. Please contact the Miele Service Department.

–The machine is supplied to be connected to a standard cold or hot water supply at a maximum temperature of 60 °C.

–A water valve with 3/4" male hose thread is to be provided on site. It should be easily accessible so the water supply can be turned off when the machine is not in use.

–The inlet hose is 1.7 m long, with a 2 cm female hose thread. A 1.5 m extension hose is available (flexible metal hose, 2.03 psi pressure). The water inlet filters in the threads must not be removed.

￿The inlet hose must not be shortened or damaged in any way (see illustration).

–See also the installation diagram supplied.

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents Professional dishwasher G 8050 / PG Contents Contents Safety instructions and warnings Technical safetyProper use Safety instructions and warnings Safety instructions and warnings Safety instructions and warnings Accessories Proper installationChildren in the vicinity Disposal of the commercial dishwasherOverview Guide to the machineControl panel G Control panel PG Before using the machine for the first time you will need Before using for the first timeTo open the door Child safety lock Opening and closing the doorTo close the door Checking the programmed water hardness level Water softenerSetting the water softener SettingsFilling the salt reservoir with salt for the first time Filling the salt reservoirRecharge indicator Filling the rinse aid reservoir Rinse aidRinse aid indicator Setting the rinse aid dosage If spots appear on cookware and glasswareIf clouding or smearing appears on cookware and glassware Use Loading the machineRemoving excess soils Items not recommended for dishwashing We recommendPlease note Hinged cup rack Upper basketAdjusting the upper basket Height limitation Lower basketLower basket inserts Removing an insertInserting an insert Dosage Adding detergentUse Turning on Selecting a program8050 Selecting options Program sequence indicatorsStarting a program DisplayDrying fan running time At the end of a programInterrupting a program Changing a programIf a program has already started Program Guide G Program Program sequence Express Program Guide PGEconomy NormalProgram Guide PG Start delay How the start delay time is displayedOptions Extra Drying Starting a program before the Start delay period has elapsedProgramming special functions To access the DOS programming levelSaving the settings Setting the dosageExample Venting the dispensing systemAccessing the rinse temperature programming level Special function Setting the rinse temperatureSetting the rinse temperature Special function 2 Increasing the water level Accessing the programming levelSetting the water level Special function Display time or temperature Setting the display Special function Actual temperature display Setting the temperature display Special function 5 Setting the heating power Setting the heating power Cleaning the filters in the wash cabinet Cleaning and careCleaning and care Cleaning the spray arms Cleaning the door and the door seal Cleaning the wash cabinetCleaning the control panel and exterior Plastic surfacesCleaning the filter Cleaning the water inlet filterCleaning the drain pump and non-return valve Technical faults Issue Possible fault Solution Frequently asked questionsIssue Possible fault Solution Indicator flashesProgram stops Show in the display at Three horizontal barsEnd of the program Knocking noisePoor cleaning results Issue Possible fault Solution CleanDishes are not Glasses and cutlery are Dishes are not drySpotted White residue is visibleOther faults Issue Possible fault Solution Program update function PC After sales serviceInstallation Instructions Installation options InstallationInstallation Leveling the machinePositioning and securing Machine InstallationRemoving the lid Steam DeflectorGranite and marble countertops Electrical connection Electrical connectionRemoving the toe kick Water inlet PlumbingDrainage Technical data Help to protect the environment Disposal of the packing materialDisposal of the appliance Page Page

PG 8050I, G 8050 specifications

The Miele G 8050 and PG 8050I are two exceptional models in the Miele range of dishwashers, known for their advanced technology, efficiency, and high-quality performance. Designed for both residential and commercial use, these dishwashers promise to elevate the dishwashing experience with a blend of innovative features and reliable characteristics.

One of the standout features of the Miele G 8050 and PG 8050I is their intelligent design aimed at optimizing cleaning results. Both models utilize Miele's patented AutoOpen Drying function, which automatically opens the dishwasher door at the end of the cycle to enhance drying performance. This feature allows for superior evaporation, ensuring dishes come out perfectly dry without the need for towel drying.

The dishwashing experience is further enhanced by Miele’s FlexLine basket system, which provides maximum flexibility and convenience. The upper basket is adjustable, allowing users to accommodate taller items with ease. The lower basket includes foldable spikes, facilitating the cleaning of various types of cookware, from plates to pots. The PG 8050I also offers an additional height adjustment feature, which is particularly useful for commercial kitchen settings where large stacks of dishes are common.

Efficiency is a defining characteristic of these models, both of which boast exemplary energy ratings, making them environmentally friendly and cost-effective over time. Equipped with Miele's patented Freshwater technology, the G 8050 and PG 8050I ensure that each cycle uses fresh water, significantly reducing water consumption compared to conventional models. This innovative system helps maintain hygiene while optimizing water usage.

The control interface of these dishwashers is user-friendly, featuring a clear display that indicates the cycle progress and remaining time. There are multiple wash programs to cater to various needs, from intense cleaning for heavily soiled pots to gentle cycles for delicate glassware. The models also include a quick wash program that delivers efficient results in a shorter time, perfect for busy households or commercial kitchens.

Additional technologies such as the "Gourmet" program are perfect for those who prioritize optimal results for specific cooking items, ensuring that each item is treated with the utmost care. The Miele G 8050 and PG 8050I also incorporate a silent motor, which minimizes noise during operation, allowing for use in open-plan living spaces without disturbance.

Overall, the Miele G 8050 and PG 8050I dishwashers represent the pinnacle of dishwashing technology, combining efficiency, flexibility, and exceptional cleaning performance to meet the demands of both home and commercial kitchens. With innovative features designed for convenience and effectiveness, they stand out as premier choices for discerning users.
Top Page Image Contents