Compaq ML370 manual 100-199, Primary Processor Test Error Codes

Diagnostics and Troubleshooting 3-27

100-199, Primary Processor Test Error Codes

The 100 series of diagnostic error codes identifies failures with processor and system board functions generated by Compaq Server Diagnostics.

Table 3-3

Primary Processor Test Error Codes

Error Code	Description	Recommended Action
101-xx	CPU test failed	Replace the processor board and retest.
103-xx	DMA page registers test failed	Replace the processor board and retest.
104-xx	Interrupt controller master test
	failed
105-xx	Port 61 error
106-xx	Keyboard controller self-test failed
107-xx	CMOS RAM test failed	1.	Replace the battery/clock module and retest.
108-xx	CMOS interrupt test failed	2.	Replace the system board and retest.
109-xx	CMOS clock load data test failed
110-xx	Programmable timer load data test	Replace the processor board and retest.
	failed
111-xx	Refresh detect test failed
113-xx	Protected mode test failed
114-xx	Speaker test failed	1.	Verify the speaker connection and retest.
		2.	Replace the speaker and retest.
		3.	Replace the system board and retest.
116-xx	Cache test failed	Replace the system board and retest.
122-xx	Multiprocessor Dispatch test failed	1.	Check the system configuration and retest.
123-xx	Interprocessor Communication	2.	Replace the processor board and retest.
	test failed	3.	Replace the system board and retest.
199-xx	Installed devices test failed	1.	Check the system configuration and retest.
		2.	Verify cable connections and retest.
		3.	Check switch and/or jumper settings and retest.
		4.	Run the Configuration Utility and retest.
		5.	Replace the processor board and retest.
		6.	Replace the system board and retest.